American Standard 2771VC, 2771V.002 User Manual

EVOLUTION™ 5' X 36"

Bathing design with form-tted backrest and molded-in armrests

EVOLUTION™ 5' X 36"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

❏ 2771VC Whirlpool w/EverClean

System

• EverClean® System

• Acrylic with berglass reinforcement

• Deep Soak Overow Drain for maximum water depth

• 1.4 HP self-draining pump/motor

• Eight ow adjustable jets including:

- Two adjustable Ideal Flow Comfort Jets

™

- Six adjustable Comfort Jets™

• Two silent air volume controls

• Side-mounted On/Off control

• Complete factory installed and tested whirlpool system

• Self leveling feet

• Undermount installation option

• Quick connect E-Z-Install™ heater system (must order E-Z-Install™ heater separately)

❏ 2771V Whirlpool

• Same as above without EverClean® System

❏ 2771V.002 Bathing Pool

Nominal Dimensions:

60" x 36" x 21-1/2" (1524 x 914 x 546mm)

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

Components Required:

❏ Bath Filler*: (specify nish) ❏ Bath Drain: 1599.205.XXX (specify color)

Custom Accessories Available:

❏ Safe-T-Heater Whirlpool Heater: 9075.120 ❏ 5 Foot Apron: 9261.019.XXX (specify color) ❏ Tile Bead Kit: 751755-100

* See American Standard Faucet Selector

American Standard whirlpools with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

NOTE: Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS

H93

Revised 4/06

EVOLUTION™ 5' X 36"

60 x 3 6 x 21 -1 /2 In.

(1524mm x 91 4 mm x 546mm)

75 Lbs. (3 4 Kg .)

800 Lbs. ( 36 3 Kg .)

87 Gal. (3 29 L .) 50 Gal. (1 89 L .)

41-1/4 x 2 6- 1/ 4 In.

(1048mm x 66 7m m)

52-1/2 x 3 0 In . (1334mm x 7 62 mm )

18-1/2 I n. ( 47 0m m)

53 Lbs./ Sq . Ft . (260 Kgs/ Sq . m. )

GENERA L SPECIFICA TIONS FOR 2 771V WHIRLP OOL

INSTALLE D SI ZE

WEIGHT WEIGHT w /W AT ER GAL. TO OV ER FL OW MIN. OPE RA TI NG G AL. BATHING WE LL A T SUMP

BATHING WE LL A T RIM WATER DE PT H TO O VERFLOW FLOOR LO AD IN G (PROJECT ED A RE A)

WHIRLP OOL ELECTRI CAL SPECIFI CATIONS

1.4 HP, 9. 7 AM PS , 120V.PUMP

60"

(1524mm)

36"

(914mm)

36"

(914mm)

(76mm)

7-1/2"

(191mm)

(152mm)

11"

(279mm)

13-3/4"

(349mm)

21-1/2"(H)

(546mm)

20"(C)

(508mm)

20-1/8"(A) (511mm)

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

C/L OF

OVERFLOW

CUT OUT IN FLOOR

FOR DRAIN

3-1/4"

(83mm)

GENERAL SPECIFICATIONS FOR 2771V BATHING POOL

60 x 36 x 21-1/2 (1524 x 914 x 546mm)

60 Lbs. (27 Kg.)

785 Lbs. (356 Kg.)

87 Gal. (329 L.)

41-1/4 x 26-1/4 In. (1048 x 667mm)

52-1/2 x 30 In. (1334 x 762mm)

18-1/2 (470mm)

52 Lbs./Sq.Ft. (255 Kgs./Sq.m)

INSTAL LED SI ZE WEIGHT WEIGHT w/WAT ER GAL. T O OVER FLOW BATHIN G WELL AT SU MP BATHIN G WELL AT RI M WATER DEPTH TO OVE RFLOW FLOOR LOADIN G

(PROJE CTED A REA)

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No. 5FT-APRON AVAILABLE AND MUST BE ORDERED

SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

H94

Revised 3/06