American Standard 2771LC, 2771L.002 User Manual
LIFETIME™ 5' X 36"
Comfortable bathing design with form-tted backrest
and molded-in armrests.
❏ Model# 2771L (specify color)
• Acrylic with berglass reinforcement
• Lifetime Overow Drain for maximum
water depth
• 1.4 HP self-draining pump/motor with dry
run seal
• Eight ow adjustable jets including:
Two adjustable Ideal Flow Comfort Jets™
Six adjustable Comfort Jets™
• Two silent air volume controls
• Side-mounted On/Off control
• Complete factory installed and tested
whirlpool system
• Self leveling feet
• Designed with undermount installation option
LIFETIME™ 5' X 36"
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
❏ Model# 2771LC (specify color)
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
❏ Model# 2771L.002 Bathing Pool Only
Nominal Dimensions:
60” x 36” x 19-3/4”
(1524 x 914 x 502mm)
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1599.205.XXX (specify color)
OR 1599.500.020 (white only)
❏ Five Foot Apron: 9261.019.XXX (specify color)
❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100
❏ Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
AlphaSan® is a registered trademark of Milliken & Co.
© 2007 American Standard Inc.
HD-5
Revised 7/07
60"
(1524mm)
36"
(914mm)
36"
(914mm)
3"
(76mm)
7-1/2"
(191mm)
6"
(152mm)
11"
(279mm)
13-3/4"
(349mm)
21-1/2"(H)
(546mm)
20"(C)
(508mm)
20-1/8"(A)
(511mm)
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
C/L OF
OVERFLOW
CUT OUT IN FLOOR
FOR DRAIN
60 x 3 6 x 21 -1 /2 I n.
(1524mm x 91 4 mm x 5 46 mm )
75 Lbs. (3 4 Kg .)
800 Lbs. ( 36 3 Kg .)
87 Gal. (3 29 L .)
50 Gal. (1 89 L .)
41-1/4 x 2 6- 1/ 4 In .
(1048mm x 66 7m m)
52-1/2 x 3 0 In . (1 33 4m m x 762mm)
18-1/2 I n. ( 47 0m m)
53 Lbs./ Sq . Ft . (2 60 K gs /Sq. m.)
GENERA L SPEC IFICA TIONS FOR 2 771L W HIRLPO OL
INSTALLE D SI ZE
WEIGHT
WEIGHT w /W AT ER
GAL. TO OV ER FL OW
MIN. OPE RA TI NG G AL .
BATHING WE LL A T SU MP
BATHING WE LL A T RI M
WATER DE PT H TO O VE RF LO W
FLOOR LO AD IN G
(PROJECT ED A RE A)
WHIRLP OOL EL ECTRI CAL SP ECIFI CATION S
1.4 HP, 9. 7 AM PS , 12 0V .PUMP
Whirlpool Shown
LIFETIME™ 5' X 36"
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA T YPE INSTALLATION. SUPPORT OF
BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL 3 WALL TILING BEAD. KIT No. TILE-BEAD AND APRON No. 5FT-APRON AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided leaet
© 2007 American Standard Inc.
HD-6
Revised 7/07
Loading...