American Standard 2770.002, 2770.018WC, 1583.470, 2770.018W, 9360.018 User Manual

CADET™ 5' X 32" WHIRLPOOL AND BATHING POOL

❏ 2770.018W Whirlpool featuring System I

• Acrylic with berglass reinforcement

• Pre-leveled tub bottom

• Form-tted backrest position

• Dual, molded in arm rests

• 1.25 HP single speed, self-draining pump/motor

• Factory installed power cord with plug

• Eight multi-directional and ow-adjustable jets including:

- Two foot jets

- Four body massage jets

- Two recessed back-rest jets

• Deck-mounted air switch On/Off

• Two silent air volume controls

• Factory installed and tested whirlpool system

CADET™ 5' x 32"

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

❏ 2770.018WC EverClean

Whirlpool

Featuring System I:

• Same as 2770.018W except with the EverClean System

❏ 2770.002 Bathing Pool only

Nominal Dimensions:

1521 x 806 x 502mm (59-7/8" x 31-3/4" x 19-3/4")

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

American Standard whirlpools and air baths with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

To Be Specied - Required:

❏ Color: ❏ Bath Filler: (specify nish) ❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ 5 Foot Acrylic Apron: 9360.018 (specify color) ❏ 5 Foot Apron: 9260.018 (specify color) ❏ Bath Caddie: 9533.100 (in Chrome only) ❏ Jet Trim Ring Kit: 9860.200-two per kit (specify nish) ❏ Universal Tile Bead Kit: 751755-100 ❏ Grab Bar Kit: 9822.200-two per kit (specify nish)

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

H63

Revised 2/08

CADET™ 5' x 32"

464 mm

(18-1/4)

38 mm (1-1/2)

502 mm (19-3/4)

1-1/2 O.D.TAILPIECE

INTEGRAL

SUPPORT

FEET

LEVELING STRINGER NOT FOR SUPPORT

ROUGH

FLOOR

70mm

(2-3/4)

305 mm

(12)

OPT IONAL TO

FIN ISHED FLOOR

USU ALLY B ETWEEN

165 1 & 19 81mm

(65 & 78)

C/L OF OVE RFLOW

102 mm

(4)

C/L OF SPOUT

C/L OF VALVES

C/L OF SHOWER ARM

70 mm (2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

1521 mm

(59-7/8)

806 mm (31-3/4)

OUTLINE OF CUTOUT 1483 mm x 768 mm (58-3/8 X 30-1/4 )

403 mm (15-7/8)

222 mm

(8-3/4)

305 mm

(12)

60mm (2-3/8)

(8) JETS

CUTOUT IN FLOOR FOR DRAIN

PUMP

FINISHED

WALL

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING SPECS FOR

DIMENSIONS

(2) AIR VALVES

ON/OFF SWITCH

PROVIDE ACCESS TO PUMP FOR

SERVICING ON ALL INSTALLATIONS

INTEGRAL

SUPPORT

FEET

464 mm (18-1/4)

38 mm (1-1/2)

502 mm (19-3/4)

1-1/2 O.D.TAILPIECE

LEVELING STRINGER

NOT FOR SUPPORT

ROUGH

FLOOR

1521 mm

(59-7/8)

806 mm (31-3/4)

OUTLINE OF CUTOUT 1473 mm x 768 mm (58 X 30-1/4 )

403 mm (15-7/8)

222 mm

(8-3/4)

305 mm

(12)

60mm (2-3/8)

70mm (2-3/4)

CUTOUT IN FLOOR FOR DRAIN

FINISHED

WALL

305 mm

(12)

OPT IONAL TO

FIN ISHED FLOOR

USU ALLY B ETWEE N

165 1 & 19 81mm

(65 & 78)

C/L OF OVE RFLOW

102 mm

(4)

C/L OF SPOUT

C/L OF VALVES

C/L OF SHOWER ARM

70 mm (2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

C/L OF DRAIN

SEE FITTING

SPECS FOR

DIMENSIONS

5 9- 7/ 8 x 31-3/ 4 x 19 -3 /4 In. (1 52 1 x 806 x 5 02 mm )

85 Lb s. ( 39 Kg.)

535 L bs . (2 43 Kg .)

54 Ga l. ( 20 4 L.) 49 Ga l. ( 18 6 L.)

20 x 40 I n. (508 mm x 1 01 6m m)

53- 1/ 2 x 26 In. (1 35 9m m x 699mm )

14 In . (3 56 mm)

41 Lb s. /S q. Ft. (1 97 K gs /S q. m. )

15. 6

29. 6

GENERA L SPEC IFICATI ONS FO R 2770 WHIRL POOL

INS TA LL ED S IZE WEI GH T WEI GH T w/ WA TER GAL . TO O VE RFLOW MIN . OP ER AT ING G AL . BAT HI NG W EL L AT SU MP BAT HI NG W EL L AT RI M WAT ER D EP TH TO O VE RF LO W FLO OR L OA DI NG (PR OJ EC TE D AREA) PTS .

CUB E (F T3)

WHIRLP OOL EL ECTRICA L SPEC IFICAT IONS

1.2 5 HP , 9. 9 AMP S, 1 20 V.SYSTEM I PUMP

59-7 /8 x 3 1-3/4 x 1 9- 3/ 4 In.

(1521m m x 80 6 mm x 50 2m m)

62 Lbs . (2 8 Kg.)

512 Lb s. ( 23 3 Kg.)

54 Gal . (2 04 L.)

20 x 4 0 In . (508mm x 10 16 mm)

53-1/2 x 2 6 In. (13 59 mm x 699mm)

14 In. ( 35 6m m)

39 Lbs ./ Sq . Ft. (18 9 Kg s/ Sq. m.)

15.6

29.6

GENERA L SPE CIFICATIONS FOR 2770 B ATHIN G POOL

INSTAL LE D SI ZE

WEIGHT WEIGHT w /W AT ER GAL. T O OV ER FLOW BATHIN G WE LL AT SUM P BATHIN G WE LL AT RIM WATER DE PT H TO OVER FL OW FLOOR LO AD IN G (PROJE CT ED A REA) PTS. CUBE ( FT3)

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGR AL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9260.018 OR 9360.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.

H64

Revised 2/08