American Standard 2740.218C, 2740.118C User Manual

COLONY™ 5' x 30" w/INTEGRAL APRON

COLONY™ 5' x 30" WHIRLPOOL AND BATHING POOL with INTEGRAL APRON

❏ 2740.118 Whirlpool, Right Hand Outlet ❏ 2740.218 Whirlpool, Left Hand Outlet

Product Features:

• High Gloss Acrylic with  berglass reinforcement

• Integral apron with removable access panel

• Integral three-sided, tiling/water retention  ange

• Integral lumbar support

• Molded-in arm rests with elbow supports

• Above  oor rough

• 1.25 HP single speed, self-draining pump/motor

• Six multi-direction jets

• One air volume control

• Deck mounted air switch On/Off control

• Factory installed and tested whirlpool system

EverClean™ Whirlpool Massage featuring System I

❏ 2740.218C Whirlpool featuring System I,

Left Hand Outlet

❏ 2740.118C Whirlpool featuring System I,

Right Hand Outlet

• Same as above except with the EverClean™ whirlpool system featuring Antimicrobial AlphaSan

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

To Be Speci ed - Required:

❏ Color: ❏ Bath Faucet: (specify  nish) ❏ Bath Drain: 1583.470 (specify  nish)

For color/ nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

❏ 2740.102 Bath only, Right Hand Outlet ❏ 2740.202 Bath only, Left Hand Outlet

• Same as above without whirlpool system

Nominal Dimensions: (59-7/8" x 29-7/8" x 19-1/4") 1521 x 759 x 489mm

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS

H65

Revised 1/07

(178mm)

C/L OF DRAIN

(19mm)

FINISHED

WALL

SEE FITTING

SPECS FOR

DIMENSIONS

1-1/2 O.D.

TAILPIECE

(762mm)

C/L OF

SUPPLIES

HORIZONTAL TAILPIECE

ABOVE FLOOR OUTLET

1-1/2 (38mm)

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

65 & 78

(1651 & 1981mm)

TOP OF

DECK

3/4

C/L OF OVERFLOW

ROUGH

FLOOR

BATH SUPPORT

7/8 WATER

RETENTION

FLANGE

(3 SIDES)

(76mm)

19-1/4

(489mm)

3-3/4

(95mm)

MATERIAL

(305mm)

OPT.

(1524mm)

(1) AIR VALVE

(6) JETS

(102mm)

COLONY™ 5' x 30" w/INTEGRAL APRON

WHIRLPOOL & BATHING POOL

HIGH GLOSS ACRYLIC

(305mm)

OPT.

59-7/8

(1521mm)

(102mm)

WATER RETENTION FLANGE (3 SIDES)

C/L OF SHOWER ARM

FINISHED

WALL

C/L OF VALVES

C/L OF SPOUT

LEVELING STRINGER

NOT FOR SUPPORT

(483mm)

2-1/2

(64mm)

14-1/8

(359mm)

UNDERSIDE OF DECK

WATER RETENTION FLANGE (3 SIDES)

14-1/8

(359mm)

ON/OFF SWITCH

PUMP

ACCESS TO PUMP/MOT THROUGH REMOVABLE FRONT ACCESS PANEL

C/L OF SHOWER ARM

FINISHED

WALL

C/L OF VALVES

C/L OF

SPOUT

2-1/2

(64mm)

TILING FLANGE

(483mm)

LEVELING STRINGER NOT FOR SUPPORT

UNDERSIDE OF DECK

HORIZONTAL TAILPIECE

6-1/4

(159mm)

C/L OF DRAIN

(19mm)

FINISHED

WALL

SEE FITTING

SPECS FOR

DIMENSIONS

1-1/2 O.D.

TAILPIECE

29-7/8

(759mm)

C/L OF

SUPPLIES

ABOVE FLOOR OUTLET

1-1/2 (38mm)

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

65 & 78

(1651 & 1981mm)

TOP OF

3/4

DECK

ROUGH

FLOOR

7/8 WATER

RETENTION

FLANGE

(3 SIDES)

C/L OF OVERFLOW

(76mm)

19-1/4

(489mm)

3-3/4

(95mm)

BATH SUPPORT

MATERIAL

GENERAL SPECIFICATIONS FOR 2740 WHIRLPOOL

INSTALLED SIZE WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW WHIRLPOOL MIN. OPERATING VOL. BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING (PROJECTED AREA) PTS.

CUBE (FT

)

59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)

25-1/2 x 55-1/2(648 x 1410mm )

WHIRLPOOL ELECTRICAL SPECIFICATIONS

105 Lbs. (47 Kgs.)

480 Lbs. (216 Kgs.)

45 Gal. (171 L) 38 Gal. (144 L)

20 x 46 (508 x 1168mm )

39 Lbs./Sq.Ft. (188 Kgs./Sq.m)

11-1/2 (292mm)

20.8

35.3

GENERAL SPECIFICATIONS FOR 2740 BATHING POOL

INSTALLED SIZE WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW BATHING WELL AT SUMP BATHING WELL AT RIM WATER DEPTH TO OVERFLOW FLOOR LOADING

59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)

70 Lbs. (32 Kgs.)

462 Lbs. (208 Kgs.)

47 Gal. (178 L)

20 x 46 (508 x 1168mm )

25-1/2 x 55-1/2(648 x 1410mm )

11-1/2 (292mm)

37 Lbs./Sq.Ft. (179 Kgs./Sq.m) (PROJECTED AREA) PTS. CUBE (FT3)

SYSTEM I PUMP 1.1 HP, 9.9 AMPS,120V.

NOTES:

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2740.118).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

20.8

35.3

H66

Revised 1/07