American Standard 2733.014, 3177.016 User Manual

TOWNSEND CHAMPION® 4 ELONGATED
51m m ± 6mm (2 ± 1/ 4)
419 mm
(16 -1/2 )
FIN ISHE D FLO OR
305 mm
(12 )
772 mm
(30 -3/8 )
C/L OF OUTLET
83m m
(3- 1/4)
216 mm (8- 1/2)
470 mm
(18 -1/2 )
C/L OF SEAT P OST HO LES 140 mm ( 5-1/2 CENTER S)
379 mm
(14 -7/8 )
267mm
(10-1/2)
16m m
(5/ 8)
873 mm
(34 -3/8 )
479 mm
(18 -7/8 )
SUP PLY
AS
REQ 'D
284 mm
(11 -3/1 6)
152 mm
(6)
254 mm
(10 )
356 mm
(14 )
FIN ISHE D WALL
FOO T ON
BOT TOM OF BOWL
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES.
RIGHT HEIGHT™ TOILET
2733.014
• Vitreous china
• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface
• Low-consumption (6.0 Lpf/1.6 gpf)
• Features Champion® 4 Flushing System performance platform
• 4" non-adjustable, piston action Accelerator™
ush valve
• 16-1/2" Rim Height for accessible applications
• Elongated siphon action jetted bowl
• 2-3/8" fully-glazed trapway
• Speed Connect® tank/bowl coupling system
• Chrome-plated trip lever
• Sweeping pier on bowl
• 100% factory ush tested
• 2 bolt caps
• 10 year warranty
TOWNSEND CHAMPION® 4
ELONGATED RIGHT HEIGHT™ TOILET
VITREOUS CHINA
3177.016 Elongated Right Height™ Bowl4281.014 Tank
Nominal Dimensions: 772 x 479 x 873mm (30-3/8" x 18-7/8" x 34-3/8")
Fixture only, seat and supply by others
Compliance Certications ­Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures­ includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability - July, 2003 revision
To Be Specied:
Color: White Bone Silver Linen Black Seat: (please specify color) Champion® Slow Close Elongated #5325.010 Rise & Shine Elongated #5324.019 EverClean® Elongated Seat with Slow Close
Snap-Off Hinges #5321.110
Supply with stop:
NOTES: THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
K21
Revised 07/07
Loading...