American Standard 2722W.102, 2722W.202 User Manual

ROPE TWIST™ BATHING POOL with INTEGRAL APRON

❏ 2722W.102 Bathing Pool, Right Hand Outlet ❏ 2722W.202 Bathing Pool, Left Hand Outlet

Product Features:

• Stylish rope-twist design feature

• Acrylic with berglass reinforcement

• Integral apron design

• Integral three-sided, tiling/water retention ange

• Generous back rest

• End drain outlet

• Design coordinated to match Rope Twist bath walls (specify walls separately)

• 17" oor to deck tub depth

• High gloss surface nish

• Limited Lifetime warranty

Nominal Dimensions:

60" x 32" x 17" (1524 x 813 x 432mm)

Compliance Certications Meets or Exceeds the Following Specications:

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

ROPE TWIST™

BATHING POOL

HIGH GLOSS ACRYLIC

To Be Specied - Required:

❏ Color: (Arctic only) ❏ Bath Filler*: (specify nish) ❏ Drain: 1640.305 (specify nish)

To Be Specied - Optional:

❏ Bath Walls: 5030W.LBW

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND PRODUCT SPECIFICATIONS

Rope Twist Bath Walls with Rope Twist Bathing Pool Shown. Specify Walls Separately.

H103

Revised 10/08

ROPE TWIST™

60 x 3 2 x 17 In.

(1 52 4 x 81 3 x 432 mm )

60 Lbs. (27 Kg)

393 L bs .( 17 9 Kg )

40 Ga l. ( 15 1 L)

22 x 44 I n. ( 55 9 x 11 18 mm )

25.5 X 53 I n. (6 48 x 1 34 6m m) 10 In . (2 54 mm )

29 Lb s. /S q. Ft . (1 95 K gs /S q.m)

15.3 27

GENERA L SPEC IFICAT IONS F OR 272 2W BA THING POOL

INSTA LL ED S IZ E

WEIGH T WEIGH T w/ WA TE R GAL. TO O VE RF LO W BATHI NG W EL L AT S UM P BATHI NG W EL L AT R IM WATER D EP TH T O OV ER FL OW FLOOR L OA DI NG (PROJ EC TE D AR EA ) PTS. CUBE (F T3)

1-1 /2 N. P. T. TH READS

1-1 /2 O. D. TA IL PIECE

16- 3/ 4"

(42 5m m)

2" (51 mm )

4-5 /8 "

(11 7m m)

ROU GH FLO OR

17"

(432mm)

(25 mm )

FINISHED WALL

SEE

NOTE

3-1 /2 " (89 mm )

32" (81 3m m)

60"

(15 24 mm)

3/4 "

(19 mm )

70mm (2-3/4)

7-3/4" (197mm)

FINISHED WALL

C/L OF DRAIN

229mm x 305mm (9 x 12) FLOOR CUTOUT

15- 1/ 8"

(38 5m m)

4-1 /2 "

(11 4m m)

25m m (1)

BAT H SUP PO RT

MAT ER IAL

TOP O F

DEC K

BATHING POOL

HIGH GLOSS ACRYLIC

NOTES:

BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2722W.202).

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standards Z124.1 and A112.19.7. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

H104

Revised 3/08