American Standard 2709.328.K2, 2709.328 User Manual
ELLISSE OVAL™ PREMIUM AIR BATH
❏ 2709.328 Premium Air Bath
• Smooth Air™ massage system with perfectly
smooth air jets throughout tub bottom
• Programmable automatic purge with time
• Acrylic with berglass reinforcement
• Pre-leveled tub bottom
• 1.0 HP variable speed, heated blower
• Factory installed power cord with plug
• Deck-mounted electronic control
• Drain and overow in Chrome included
• EverClean® System
❏ 2709.328.K2 Premium Air Bath
with Chromatherapy
Same as 2709.328 but also includes:
• Two digitally controlled lights
• Electronic control with color selector and
color cycle function
ELLISSE OVAL™
PREMIUM AIR BATH
HIGH GLOSS
Nominal Dimensions:
69-1/4" x 38-1/2" x 19-3/4"
(1759 x 978 x 502mm)
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools and air baths with
EverClean® incorporate a patented silver-ion additive
right into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
To Be Specied - Required:
❏ Color:
❏ Drain included (chrome)
❏ Other Bath Faucet (specify nish):
❏ Grab Bar Kit: 9827-200 two per kit (specify nish):
To Be Specied - Optional:
❏ Apron: 9460.018 (specify color)
❏ Tile Bead Kit: 751755-200
❏ Drain Trim Kit: 1585.200 (specify nish)
❏ Air Blower Remote Mounting Kit: 754025-0071A
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
© 2008 AS America Inc.
H51
Rev. 2/08
ELLISSE OVAL™
GENERAL SPECI FICATIO NS FOR 2709 A IR BAT H
69- 1/4 x 3 8- 1/2 x 19 -3 /4 In.(1 759 x 9 78 x 502mm )
107 Lbs. ( 49 Kg .)
640 Lbs. ( 29 1 K g.)
64 Gal. (2 43 L)
45 x 23 In . (11 43 x 58 4mm )
63 x 32 In . (16 00 x 81 3mm )
13 In. ( 33 0m m)
35 Lbs./ Sq .F t. (166 Kg s./ Sq.m)
25. 6
49. 4
ELECTRICAL SPECIFICATIONS
1.0 HP , 10 AM PS, 12 0V.BLO WER
INS TALLE D SI ZE
WEI GHT
WEI GHT w /W AT ER
GAL . TO OV ER FLO W
BAT HING WE LL AT SUMP
BAT HING WE LL AT RIM
WAT ER DE PT H TO OVERF LO W
FLO OR LO AD IN G
(PR OJECT ED A REA )
PTS .
CUB E (FT3)
FLOOR CUTOUT
229 X 459mm
(9" X 19")
1759 mm
(69-1/4")
OUTLINE OF
CUTOUT
240 mm
(9-7/16")
978 mm
(38-1/2")
489mm
(19-1/4")
76mm
(3")
C
L
OF DRAIN
OUTLET
PROVIDE ACCESS
TO BLOWER FOR
SERVICING ON ALL
INSTALLATIONS
16 AIR JETS
AIR
BLOWER
SEE FTTG.SPECS
FOR DIMENSION
C
L
OF SUPPLIES
CONTROL
PANEL
11-1/4"
(286mm)
7-3/4" TYPICAL
(197mm)
ROUGH
FLOOR
1-1/2" O.D. TAILPIECE
495mm
(19-1/2")
INTEGRAL FEET
WITH ATTACHED
BASEBOARD
86mm (3-3/8")
38mm
(1-1/2")
533mm
(21")
1-1/2" N.P.T.M. THREADS
35mm
(1-3/8")
98mm
(3-7/8")
C
L
TO OVERFLOW
PREMIUM AIR BATH
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA T YPE INSTALLATION. SUPPORT
OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT IS REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR ADDITIONAL INFORMATION.
▲ CUTOUT TEMPL ATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
© 2008 AS America Inc.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certied. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
H52
Rev. 2/08
Loading...