American Standard 2709.028WC User Manual
ELLISSE OVAL™ WHIRLPOOL &
BATHING POOL
❏ 2709.028WC Whirlpool featuring System II
• Acrylic with berglass reinforcement
• Pre-leveled tub bottom
• Factory installed power cord and plug
• Six multi-directional and ow-adjustable body
massage jets
• Deck-mounted air switch On/Off
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
• 2.1 HP, two speed self-draining pump/motor
with dry run seal and Pulse feature
• Deck-mounted electronic On/Off with 20 minute
built-in timed safety shut off and chrome bezel
• EverClean™ whirlpool system
❏ 2709.028WC.K2 Whirlpool Massage
with Chromatherapy
Same as 2709.018WC but also includes:
• Two digitally controlled lights
• Electronic control with color selector and
color cycle function
❏ 2709.002 Bathing Pool only
Nominal Dimensions:
1759 x 978 x 502mm
(69-1/4" x 38-1/2" x 19-3/4")
Compliance Certi cations Meets or Exceeds the Following Speci cations:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
ELLISSE OVAL™
WHIRLPOOL & BATHING POOL
HIGH GLOSS
To Be Speci ed - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
❏ Grab Bar Kit: 9827-200-two per kit (specify nish)
To Be Speci ed - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-two per kit (specify color)
❏ System II Control Bezel: 9861.100 (specify nish)
For color/ nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
The EverClean™ antimicrobial system incorporates
AlphaSan®, a patented antimicrobial agent manufactured right into the circulation system components, which suppresses the growth of unsightly
algae, fungus, mold and mildew.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
AlphaSan is a registered trademark of Milliken & Co.
© 2007 American Standard Inc.
H43
Revised 8/07
ELLISSE OVAL™
WHIRLPOOL & BATHING POOL
HIGH GLOSS
240 mm
(9-7/16)
SEE FTTG.SPECS
FOR DIMENSION
OF SUPPLIES
C
L
305mm(12) X 229mm(9)
978 mm
(38-1/2)
REMOVABLE BLANK
86mm
(3-3/8)
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
489mm
(19-1/4)
76mm
(3)
SAFE-T-HEATER
305mm
(12)
OF DRAIN
C
L
OUTLET
102mm
(4)
1-1/2 N.P.T.M.
1-1/2 O.D.
TAILPIECE
CUTOUT IN FLOOR FOR DRAIN
C/L OF
VALVES
THREADS
GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
1759 mm
(69-1/4)
ON/OFF
SWITCH
C/L OF
SPOUT
35mm
(1-3/8)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
OUTLINE OF
CUTOUT
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
C/L OF
SHOWER ARM
1651-1981mm
(65-78)
INTEGRAL
FEET
SUPPORT
98mm
(3-7/8)
45 x 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
OPTIONAL
ROUGH
FLOOR
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
13 In. (330mm)
2.1 HP, 15.6 AMPS, 120V.SYSTEM II PUMP
25.6
49.4
PUMP
1759 mm
(69-1/4)
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
SHOWER ARM
C/L OF
SPOUT
INTEGRAL
FEET
SUPPORT
35mm
(1-3/8)
OUTLINE OF
CUTOUT
C/L OF
ROUGH
FLOOR
98mm
(3-7/8)
SEE FTTG.SPECS
FOR DIMENSION
OF SUPPLIES
C
L
978 mm
(38-1/2)
489mm
(19-1/4)
95mm
(3-3/4)
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
76mm
305mm
(12)
(3)
OF DRAIN
C
L
OUTLET
C/L OF
VALVES
102mm
(4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
240 mm
(9-7/16)
GENERAL SPECIFICATIONS FOR 2709 BATHING POOL
INSTALLED SIZE
69-1/4 x 38-1/2 x 19-3/4 In.
(1759 x 978 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
45 X 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
34 Lbs./Sq.Ft. (165 Kgs./Sq.m)
77 Lbs. (35 Kg.)
611 Lbs. (275 Kg.)
64 Gal. (243 L)
13 In. (330mm)
(PROJECTED AREA)
PTS.
CUBE (FT3)
1651-1981mm
(65-78)
OPTIONAL
25.6
49.4
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISL AND OR PENINSUL A TYPE INSTALLATION. SUPPORT
OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT IS REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
▲ CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF 152mm (6) ABOVE ROUGH FLOOR.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certi ed. These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided lea et.
© 2007 American Standard Inc.
H44
Revised 8/07
Loading...