American Standard 2697.202, 2697.102 User Manual
BELMOR™ 5' CAST IRON TUB
SUP PO RT
FEE T
ROU GH
FLO OR
FIN IS HED
WAL L
229 x 30 5m m
9" X 12" H OLE I N S UB FL OOR
FOR B ELO W FLO OR RO UGH
762 mm
30"
152 4m m
60"
381 mm
15"
FIN IS HED
WAL L
FIN IS HED
WAL L
FINISHED
WALL
206mm
8-1/2"
356 mm
14"
64m m
2-1 /2 "
DIA .
6mm
1/4 "
13m m
1/2 "
76m m
3"
STD. 1-1/2
DRAIN OUTLET
38m m
1-1 /2 "
GENERAL SPECIFICATIONS FOR 2697 BATHING POOL
60 x 30 x 14 In. (1524 x 762 x 356mm)
430 Lbs. (195 Kg.)
715 Lbs. (320 Kg.)
34 Gal. (128 L)
42 x 18 In. (1066 x 457mm)
24 x 55 In. (610 x 1397mm)
10 In. (254mm)
60 Lbs./Sq.Ft. (293 Kgs./Sq.m)
12.5
INSTAL LED SIZE
WEIGHT
WEIGHT w/WATER
GAL. T O OVERFLOW
BATHIN G WELL AT S UMP
BATHIN G WELL AT R IM
WATER DEPTH TO OV ERFLOW
FLOOR LOADING
(PROJE CTED AREA F T2)
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
BARRIER FREE
❏ 2697.102 Right hand outlet
❏ 2697.202 Left hand outlet
Product Features:
• Enameled cast iron construction
• One-piece bath
• Integral apron
• Comfortable lumbar support
• End drain outlet
• Full slip-resistant pattern
Nominal Dimensions:
60" x 30" x 14"
(1524 x 762 x 356mm)
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.1 for Cast Iron Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• CAN / CSA B45 Series
BELMOR™
5' TUB
ENAMELED CAST IRON
To Be Specied:
❏ Color:
❏ Bath Faucet*:
❏ Faucet Finish:
❏ Drain: 1583.470
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
RIGHT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS
(2697.102).
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.1. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaet.
H160
Revised 2/08
Loading...