American Standard 2675.018C, 2675.018, 2675.002 User Manual

COLONY 5'™ WHIRLPOOL AND BATHING POOL

❏ 2675.018 Whirlpool featuring System I:

• Acrylic with berglass reinforcement

• Dual, molded-in armrests at lumbar area

• 1.25 HP single speed, self-draining pump/motor with dry run seal

• Factory installed power cord with plug

• Six multi-directional and individually ow-rate adjustable color-coordinated jets

• Deck-mounted, color-coordinated air switch On/Off control

• Single, color-coordinated air volume control

• Factory installed and tested whirlpool system

COLONY 5'™

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

❏ 2675.018C EverClean

Whirlpool

Featuring System I:

• Same as 2675.018 except with the EverClean System

❏ 2675.002 Bathing Pool

• Same as above without whirlpool system

Nominal Dimensions: 1524 x 832 x 502mm (5' x 32-3/4" x 19-3/4")

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

American Standard whirlpools and air baths with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

To Be Specied - Required:

❏ Color: ❏ Bath Faucet: (specify nish) ❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ 5 Foot Acrylic Apron: 9260.018 (specify color) ❏ 5 Foot Apron: 9360.018 (specify color) ❏ Grab Bar Kit: 9822.200-two per kit (specify nish) ❏ Jet Trim Ring Kit: 9860.200-two per kit (specify nish)

for Body Massage Jets only ❏ Universal Tile Bead Kit: 751755-100

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

H73

Revised 2/08

COLONY 5'™

464 mm (18-1/4)

38 mm (1-1/2)

502 mm (19-3/4)

1-1/2 O.D.TAILPIECE

BATH

SUPPORT

MATERIAL

LEVELING STRINGER

NOT FOR SUPPORT

ROUGH

FLOOR

1524 mm

(60)

832 mm (32-3/4)

OUTLINE OF CUTOUT 1486 mm x 794 mm (58-1/2 X 31-1/4 )

416 mm (16-3/8)

216 mm

(8-1/2)

305 mm

(12)

38 mm

(1-1/2)

(6) JETS

79 mm (3-1/8)

CUTOUT IN FLOOR FOR DRAIN

PUMP

FINISHED

WALL

305 mm

(12)

OPT IONAL TO

FIN ISHED FLOOR

USU ALLY B ETWEEN

165 1 & 19 81mm

(65 & 78)

C/L OF OVE RFLOW

102 mm

(4)

C/L OF SPOUT

C/L OF VALVES

C/L OF SHOWER ARM

70 mm (2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

SEE FITTING

SPECS FOR

DIMENSIONS

(1) AIR VALVE

ON/OFF SWITCH

PROVIDE ACCESS TO PUMP FOR

SERVICING ON ALL INSTALLATIONS

464 mm (18-1/4)

38 mm (1-1/2)

502 mm (19-3/4)

1-1/2 O.D.TAILPIECE

BATH

SUPPORT

MATERIAL

LEVELING STRINGER

NOT FOR SUPPORT

ROUGH

FLOOR

1524 mm

(60)

832 mm (32-3/4)

OUTLINE OF CUTOUT 1486 mm x 794 mm (58-1/2 X 31-1/4 )

416 mm (16-3/8)

216 mm

(8-1/2)

305 mm

(12)

38 mm

(1-1/2)

79 mm (3-1/8)

CUTOUT IN FLOOR FOR DRAIN

FINISHED

WALL

305 mm

(12)

OPT IONAL TO

FIN ISHED FLOOR

USU ALLY B ETWEE N

165 1 & 19 81mm

(65 & 78)

C/L OF OVE RFLOW

102 mm

(4)

C/L OF SPOUT

C/L OF VALVES

C/L OF SHOWER ARM

70 mm (2-3/4)

117 mm

(4-5/8)

1-1/2 N.P.T.M.

THREADS

19 mm

(3/4)

229 mm

(9)

C/L OF

SUPPLIES

SEE FITTING

SPECS FOR

DIMENSIONS

60 x 32-3/ 4 x 19 -3 /4 I n. (1 52 4 x8 32 x 5 02 mm)

95 Lbs. (43 Kg .)

604 Lbs. (27 5 Kg .)

61 Gal. (230 L .) 42 Gal. (159 L .)

20 x 39 In. ( 50 8 x 99 1m m)

27-1/2 x 56 I n. (6 99 x 1 42 2m m)

14-1/4 In. ( 36 2m m)

44 Lbs./Sq. F t. ( 21 3 Kg s/ Sq . m. )

15.6

29.6

GENERA L SPEC IFICA TIONS FOR 26 75 WHI RLPOO L

INSTALLED SI ZE WEIGHT WEIGHT w/WAT ER GAL. TO OVER FL OW WHIRLPOOL MI N. O PE RA TI NG V OL . BATHING WELL A T SU MP BATHING WELL A T RI M WATER DEPTH TO O VE RF LO W FLOOR LOADIN G (PROJECTED A RE A) PTS.

CUBE (FT3)

WHIRLP OOL EL ECTRI CAL SP ECIFIC ATIONS

1.25 HP, 9.9 A MP S, 1 20 V.SYSTEM I PUM P

60 x 32-3/4 x 19 -3 /4 I n.

(1524mm x 832 mm x 5 02 mm )

70 Lbs. (32 Kg.)

579 Lbs. (261 Kg .)

61 Gal. (230 L.)

20 x 39 In. (50 8 mm x 9 91 mm )

27-1/2 x 56 In. (6 99 m m x 14 22 mm )

14-1/4 In. (362m m)

42 Lbs./Sq. Ft. ( 20 2 Kg s/ Sq . m. )

15.6

29.6

GENERA L SPEC IFICA TIONS FOR 26 75 BA THING POOL

INSTALLED SIZE

WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW BATHING WELL AT SU MP BATHING WELL AT RI M WATER DEPTH TO O VE RF LO W FLOOR LOADING (PROJECTED AREA) PTS. CUBE (FT3)

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

OPTIONAL 3 WALL TILING BEAD KIT AND APRON NO. 926 0.018 OR 9360.018, AND GRAB BAR KIT NO. 9822.200 AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

H74

Revised 2/08