American Standard 2645V.002C User Manual

EVOLUTION™ 5-1/2' x 36" OVAL AIR BATH

❏ 2645V.068C Air Bath

• EverClean® System

• Acrylic with berglass reinforcement

• Can be drop-in or undermount installed

• Full body massage with 24 strategically placed air jets

• Variable speed air blower with heater

• Automatic purge with timer

• Chrome jets (optional color-matched jet caps)

❏ 2645V.002 Bathing Pool

Nominal Dimensions:

66" x 36" x 19-3/4" (1676 x 914 x 502mm )

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Air Bath Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

American Standard whirlpools with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

EVOLUTION™ 5-1/2' x 36"

OVAL AIR BATH

HIGH GLOSS

To Be Specied - Required:

❏ Color: ❏ Bath Filler: (specify nish) ❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ 5-1/2 Foot Apron: 9266.018.XXX (specify color)

❏ Tile Bead Kit: 751755-100

❏ Air Bath Button Cover Set: 9810.025 (specify color) ❏ Air Blower Remote Mounting Kit: 754025-0071A

* See American Standard Faucet Selector

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

H87

Revised 4/08

OVAL (MODEL 2645V.068C)

66"

(1676mm)

5-3/8"

(137mm)

(152mm)

36"

(914mm)

8-1/4"

(210mm)

(76mm)

11-1/4"

(286mm)

1-3/4" (44mm)

18"

(457mm)

CUT OUT IN FLOOR

FOR DRAIN

DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.

END VIEW

DRAIN/OVERFLOW

8-1/4"

(209mm)

1-3/4" (44mm)

19-3/4"

(502mm)

18-1/4"

(464mm)

15-1/4"

(387mm)

GENERAL SPECIFICATIONS FOR 2645V AIR BATH

AIR BATH ELECTRICAL SPECIFICATIONS

BLOWER 1.0 HP, 10 AMPS,120V.

66 x 36 x 19-3/4 (1676 x 914 x 502mm)

96 Lbs. (44 Kgs.)

580 Lbs. (263 Kgs.)

58 Gal. (219 L)

49 x 26 In. (1245 x 660mm)

62 x 32 In.(1575 x 813mm)

12-3/4 In. (324mm)

35 Lbs./Sq.Ft. (171 Kgs./Sq.m)

INSTAL LED SI ZE WEIGHT WEIGHT w/WAT ER GAL. T O OVER FLOW BATHIN G WELL AT SU MP BATHIN G WELL AT RI M WATER DEPTH TO OVE RFLOW FLOOR LOADIN G (PROJE CTED A REA)

EVOLUTION™ 5-1/2' x 36"

OVAL AIR BATH

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH AIR BATH FOR ADDITIONAL INFORMATION.

OPTIONAL APRON 926 6.018 OR 9366.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.

FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

H88

Revised 4/08