American Standard 2645LC, 2645L.002 User Manual
LIFETIME™ OVAL
5-1/2' Whirlpool and Bathing Pool
❏ Model# 2645L (specify color)
• Acrylic with berglass reinforcement
• Molded-in lumbar back rest
• Factory installed and tested whirlpool system
• 1.4 HP single speed, self-draining pump/motor
• Six adjustable Ideal Flow Comfort Jets™
• Side-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
• Self leveling feet
• Designed with undermount installation option
❏ Model# 2645LC:
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
LIFETIME™ OVAL
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
❏ Model# 2645L.002 Bathing Pool only
Nominal Dimensions:
66” x 36” x 19-3/4”
(1676 x 914 x 502mm )
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
To Be Specied - Required:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
OR 1599.500.020 (white only)
To Be Specied - Optional:
❏ 5-1/2 Foot Acrylic Apron: 9366.018.XX (specify color)
❏ 5-1/2 Foot Apron: 9266.018.XXX (specify color)
* See American Standard Faucet Selector
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
AlphaSan® is a registered trademark of Milliken & Co.
© 2007 American Standard Inc.
HD-9
Revised 7/07
LIFETIME™ OVAL
66"
(1676mm)
5-3/8"
(137mm)
6"
(152mm)
36"
(914mm)
8-1/4"
(210mm)
3"
(76mm)
11-1/4"
(286mm)
36"
(914mm)
18"
(457mm)
19-3/4"(H)
(502mm)
18-1/4"(C)
(464mm)
C/L OF
DRAIN
15-1/4"(A)
(387mm)
CUT OUT IN FLOOR
FOR DRAIN
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
66 x 3 6 x 19 -3/ 4 In .
(1 67 6 x 91 4 x 5 02 mm )
96 Lbs. (44 Kg.)
580 L bs . (2 63 K g. )
58 Ga l. ( 21 9 L)
42 Ga l. ( 15 9 L)
49 x 26 I n. ( 12 45 x 6 60 mm )
62 X 32 I n. ( 15 75 x 8 13 mm )
12- 3/ 4 In . (3 24 mm )
35 Lb s. /S q. Ft . (1 71 K gs ./ Sq .m )
GENERA L SPEC IFICAT IONS F OR 264 5L BAT HING P OOL
INS TA LL ED S IZ E
WEI GH T
WEI GH T w/ WA TE R
GAL . TO O VE RF LO W
WHI RL PO OL M IN . OP ER AT IN G VO L.
BAT HI NG W EL L AT S UM P
BAT HI NG W EL L AT R IM
WAT ER D EP TH T O OV ER FL OW
FLO OR L OA DI NG
(PR OJ EC TE D AR EA )
WHIRLPO OL ELE CTRICA L SPEC IFICAT IONS
1.4 H P, 9 .7 A MP S, 120V .PUM P
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA T YPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL APRON 9266.018 OR 9366.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
© 2007 American Standard Inc.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided pages.
HD-10
Revised 7/07
Loading...