Installation
Instructions
TOWNSQUARE
ACCESSORIES
SOAP DISH
TUMBLER WITH TOOTHBRUSH HOLDER
LOTION/SOAP DISPENSER
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read these
instructions carefully before you begin.
2555.050
2555.091
2555.051
M968228C
Recommended Tools
10'
Tape Measure
Regular Screwdriver
Drill
Phillips Screwdriver
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR
WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID,
POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
SOAP DISH, LOTION/SOAP DISPENSER and TUMBLER WITH TOOTHBRUSH HOLDER
1
MOUNTING & INSTALLATION
The SOAP DISH (1), TUMBLER WITH TOOTHBRUSH HOLDER (2) and LOTION/SOAP DISPENSER (11) work best if secured to a wall stud
or cross brace within the wall, using the SCREWS (4) supplied.
If the SOAP DISH (1), TUMBLER WITH TOOTHBRUSH HOLDER (2) and LOTION/SOAP DISPENSER (11) are to be installed on a tile or plaster
wall the DRYWALL ANCHORS (6) or TILE ANCHORS (8) and SCREWS (4) should be used.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (5) as a template mark the two
spots for the mounting holes. If MOUNTING PLATE (5) is secured to a stud or cross brace drill small pilot holes for SCREWS (4).
For installations on drywall,
screwdriver or cordless screwdriver into recess of anchor. Press into drywall while turning the anchor clockwise until it is seated flush with
the wall. Place MOUNTING PLATE (5) over DRYWALL ANCHORS (6) and insert screws provided with #2 Phillips screwdriver. See
illustration below. Secure MOUNTING PLATE (5) to wall with SCREWS (4).
For installations on tiled walls,
drill two 1/4" diameter holes a minimum of 1-1/4" deep. Insert the two TILE ANCHORS (8) flush with face of the finished wall.
Secure MOUNTING PLATE (5) to wall with SCREWS (4).
INSTALL SOAP DISH, TUMBLER WITH TOOTHBRUSH HOLDER and LOTION/SOAP DISPENSER
2
use DRYWALL ANCHORS (6) and SCREWS (4) for securing MOUNTING PLATE (5) to wall. Place #2 Phillips
If TILE ANCHORS (8) and SCREWS (4) are use for securing MOUNTING PLATE (5), then
Place ESCUTCHEON (7) onto MOUNTING BRACKET (5), and secure with ATTACHMENT SCREW (3).
Install the SOAP DISH (1), TUMBLER WITH TOOTHBRUSH HOLDER (2) or LOTION/SOAP DISPENSER (11) into the WALL ESCUTCHEON (7).
Tighten SET SCREW (9) using 2-1/2mm HEX KEY (10) supplied to secure assembly to ESCUTCHEON (7).
USE MOUNTING BRACKET (5)
AS TEMPLATE
8
6
8
FINISHED WALL
5
4
5
4
1
7
9
3
10
2
INSTALL LOTION/SOAP DISPENSER
2
USE MOUNTING BRACKET (5)
AS TEMPLATE
8
6
5
FINISHED WALL
5
7
11
4
LOTION/SOAP DISPENSER
M950096-YYY0A
PUMP
M922270-0070A
DISPENSER BOTTLE
SOAP DISH
M922271-0070A
GLASS SOAP DISH
9
4
TUMBLER WITH TOOTHBRUSH HOLDER
TUMBLER WITH
TOOTHBRUSH HOLDER
3
10
TOWNSQUARE
ACCESSORIES
SOAP DISH
LOTION/SOAP DISPENSER
MODEL NUMBERS
2555.050
2555.091
2555.051
M922273-0070A
TUMBLER
M922272-0070A
TOOTHBRUSH HOLDER
M962125-YYY0A
LOTION/SOAP
DISPENSER
M962124-YYY0A
SOAP DISH
Replace the "YYY" with appropriate finish code
CHROME
POLISHED BRASS (PVD)
SATIN (PVD)
002
099
295
A918486-0070A
ATTACHMENT SCREW
M962118-0070A
MOUNTING
BRACKET
M962117-YYY0A
ESCUTCHEON
For toll-free information and answers to your questions, call:
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2002
HOT LINE FOR HELP
1-800 442-1902
Weekdays 8:00 a.m. to 8:00 p.m. EST
Weekdays 8:00 a.m. to 7:00 p.m. EST
M968228C