American Standard 2392.202 IPB, 2392.202 ICHTC, 2393.202 ICH, 2392.202 ICH, 2393.202 ICHTC User Manual
PRINCETON™ RECESS BATH W/ INTEGRAL
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.
INSTALL WITH SEAT AT HEAD END.
BARRIER FREE
OVERFLOW for Above Floor Rough Installation
Americast® brand engineered material
❏ 2392.202 ICH (Chrome Trim) Left Hand Outlet
for above oor installation
❏ 2392.202 ICHTC Same as above with Tub Cover
❏ 2393.202 ICH (Chrome Trim) Right Hand Outlet
for above oor installation
❏ 2393.202 ICHTC Same as above with Tub Cover
❏ 2392.202 IPB (Polished Brass Trim)
Left Hand Outlet
❏ 2392.202 IPBTC Same as above with Tub Cover
❏ 2393.202 IPB (Polished Brass Trim)
Right Hand Outlet
❏ 2393.202 IPBTC Same as above with Tub Cover
❏ 2392.202 IBS (Brushed Satin Trim)
Left Hand Outlet
❏ 2392.202 IBSTC Same as above with Tub Cover
❏ 2393.202 IBS (Brushed Satin Trim)
Right Hand Outlet
❏ 2393.202 IBSTC Same as above with Tub Cover
• Lift and turn drain stopper assembly included
with bath
• Escutcheon included and installed on bath
• Acid resistant porcelain nish
• Recess bath with integral apron and
tiling ange
• Integral lumbar support
• Beveled headrest
• Full slip-resistant coverage
• End drain outlet
PRINCETON™ RECESS BATH
WITH INTEGRAL OVERFLOW
AMERICAST® BRAND ENGINEERED MATERIAL
Photograph details integral overow and drain
assembly. Drain assembly included with bath.
To Be Specied:
❏ Color:
❏ Bath Filler: (specify nish)
❏ Bath Drain: 1583.470 (specify nish)
To Be Specied - Optional:
❏ Pressure Test Kit†: 791363-0070A
Nominal Dimensions:
1524 x 762 x 445mm
(60" x 30" x 17-1/2")
Bathing Well Dimensions:
1423 x 635 x 337mm
(56" x 25" x 13-1/4")
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.4 for Americast Plumbing Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities
• ANSI Z124.1 Ignition Test
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
© 2008 AS America Inc.
*See faucet section for additional models available
†
Pressure Test Kit is necessary to seal over ow and perform
system pressure test.
Americast® brand engineered material is a composition of porcelain bonded
to enameling grade metal, bonded to a patented structural composite.
SEE REVERSE FOR PRODUCT DIMENSIONS
AND SPECIFICATIONS
H115
Revised 2/08
152 4mm
(60 )
762 mm
(30 )
FIN ISHED
WAL L
19m m
(3/ 4)
FINISHED
WALL
C/L OF DRAIN
197 mm
(7- 3/4)
ROU GH
FLO OR
445 mm
(17 -1/2)
FIN ISHED
WAL L
362m m
(14- 1/4)
48m m
(1- 7/8)
SEE FITTING SPECS
FOR DIMENSION
C/L OF
SPO UT
C/L OF
VAL VES
C/L OF
SHO WER AR M
435 mm
(17 -1/8)
25m m
(1)
165 1-1981 mm
(65 -78)
OPT IONAL
1-1/ 2 N.P. S.M.
THRE ADS OR
1-1/ 2 O.D. TUBING
SLIP JOINT
102m m
(4)
305 mm
(12 )
SEE
NOT E
89m m
(3- 1/2)
C/L OF
SUP PLIES
TIL ING FL ANGE
GENERAL SPECS FOR 2392/2393ICH, IBS BATHING POOL
60 x 30 x 17-1/2 In. (1524 x 762 x 445mm)
121 Lbs. (55 Kg.)
471 Lbs. (214 Kg.)
42 Gal. (159 L)
42 x 19 In. (1067 x 483mm)
56 x 25 In. (1423 x 635mm)
9-1/2 In. (241mm)
38 Lbs./Sq.Ft. (182 Kgs./Sq.m)
7.4
21.2
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT3)
STUD
SHIM
DRY WA LL
TILE
SEALAN T
TUB
ROOFIN G NAI L
STEEL
STUD
SHIM
DRY WA LL
WASHER
TILE
SEALAN T
TUB
4" (10 2mm)
DRYWAL L
SCREW
WOOD STUD S STEEL STU DS
Below is shown typical cross sections of the tub
rim showing typical wall constructions.
51 x 102mm (2 x 4) WOOD
STRIN GER F ULL L ENGT H
PRINCETON™ RECESS BATH
BARRIER FREE
WITH INTEGRAL OVERFLOW
AMERICAST® BRAND ENGINEERED MATERIAL
© 2008 AS America Inc.
NOTES
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS.
(2393.202.ICH).
DRAIN AND OVERFLOW ESCUTCHEON INCLUDED WITH BATH.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH
FOR DRAIN INSTALLATION.
BATH FAUCET NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.
CONCEALED PIPING NOT FURNISHED.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4 These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaet.
H116
Revised 2/08
Loading...