American Standard 4037.017, 2241.016, 3338.011 User Manual

RENAISSANCE™ ROUND FRONT TOILET

❑ 2241.016

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• 305mm (12") rough-in

• Round front bowl

• Close-coupled tank

• Color matched trip lever

• 2 bolt caps

• 100% factory  ush tested

❑ 3338.011 Bowl ❑ 4037.017 Tank

Nominal Dimensions: 693 x 505 x 752mm (27-5/16" x 19-7/8" x 29-5/8")

RENAISSANCE™

ROUND FRONT TOILET

VITREOUS CHINA

Fixture only, seat and supply by others

Compliance Certi cations Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Speci ed:

❏ Color: ❏ White ❏ Bone ❏ Seat: American Standard #5322.011 “Rise and

Shine" solid plastic closed front seat with cover. ❏ Seat: American Standard #5308.014 “Laurel" molded closed front seat with cover.

❏ Alternate Seat: ❏ Supply with stop:

FINISHED WALL

693mm

17mm ± 6mm (11/16 ±1/4)

84mm

(3-5/16)

159mm

(6-1/4)

305mm

(12)

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS SUPPLIED.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

(27-5/16)

232mm (9-1/8)

425mm

(16-3/4)

C/L OF SEAT POST HOLES 140mm (5-1/2 CENTERS)

16mm

(5/8)

308mm

(11-1/4)

C/L OF OUTLET

383mm

(15-1/16)

FINISHED FLOOR

SUPPLY

REQ'D

*203mm

(8)

152mm

(6)

505mm

(19-7/8)

C/L

375mm (14-3/4)

232mm

(9-1/8)

752mm

(29-5/8)

K75

Revised 5/05