American Standard 2112.014 User Manual

FIN ISHE D WALL

32m m ± 6mm (1- 1/4 ± 1/4)

387 mm

(15 -1/4 )

FIN ISHE D FLO OR

305 mm

(12 )

721 mm

(28 -3/8 )

C/L OF OUT LET

83m m

(3- 1/4)

419 mm

(16 -1/2 )

C/L OF SEAT P OST HO LES 140 mm ( 5-1/2 CENTER S)

362 mm

(14 -1/4 )

264mm

(10-3/8)

16m m

(5/ 8)

841 mm

(33 -1/8 )

SUP PLY

REQ 'D

254 mm

(10 )

152 mm

(6)

254 mm

(10 )

356 mm

(14 )

235 mm (9- 1/4)

498 mm

(19 -5/8 )

SKYLINE CHAMPION® 4 ROUND FRONT TOILET

❏ 2112.014

• Vitreous china

• EverClean® surface inhibits the growth of stain and odor causing bacteria, mold and mildew on

the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® 4 Flushing System

performance platform

• 4" non-adjustable, piston action Accelerator™ ush valve

• Round Front siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect® tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

❏ 3110.016 Round Front Bowl ❏ 4077.014 Tank

SKYLINE CHAMPION® 4

ROUND FRONT TOILET

VITREOUS CHINA

Nominal Dimensions:

28-3/8" x 19-5/8" x 33-1/8" (721 x 498 x 841mm)

Fixture only, seat and supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures

- includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non Adjustability - July, 2003 revision

To Be Specied:

❏ Color: 020 White ❏ Seat: (please specify color)  ❏ Champion® Slow Close

Round Front #5330.010

 ❏ Rise & Shine Round Front #5322.011  ❏ Laurel Round Front #5308.014 ❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided page

K31

Revised 2/08

K32

Revised 2/08