American Standard 2099.016 User Manual

CADET™ ROUND FRONT ONE-PIECE TOILET

711m m

(28)

206m m (8-1 /8)

16 ± 6mm (5/8 ± 1/4 )

375m m

(14- 3/4)

324m m

(12- 3/4)

159mm

(6-1/4)

679m m

(26- 3/4)

397m m

(15- 5/8)

457m m

(18)

79mm

(3-1 /8)

FINI SHED W ALL

422m m

(16- 5/8)

C/L OF SEA T POST HOLES 140m m (5-1 /2) CENT ERS

305m m

(12)

C/L OF OUT LET

16mm

(5/8 )

FINI SHED

FLOO R

244m m

(9-5 /8)

140m m

(5-1 /2)

SUPP LY AS

REQ' D

133m m

(5-1 /4)

FINI SHED FLOO R

❑ 2099.016

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• One-piece design

• Round front siphon action jetted bowl with 2" trapway

• Rim height at 381mm (15")

• Color-matched trip lever

• 2 bolt caps

• Internal trapway area fully glazed

• 100% factory ush tested

• Seat not included

Nominal Dimensions: 711 x 457 x 679mm (28" x 18" x 26-3/4")

Fixture only, seat and supply by others

CADET™

ROUND FRONT ONE-PIECE TOILET

VITREOUS CHINA

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specied:

❑ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Silver ❏ Black ❑ Trip Lever: 047242-XXX0A ❑ Color-matched (supplied) ❑ 002 Chrome ❑ 099 Polished Brass ❑ 295 Satin Nickel

❏ Supply with Stop: ❏ Seat:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K17

Revised 2/08