American Standard 2092.017 User Manual

HAMILTON™

ELONGATED SPA CE-SAVING

ONE-PIECE T OILET VITREOUS CHINA

HAMILTON™ ELONGATED SPACE-SAVING ONE-PIECE TOILET

❏ 2092.017

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Low-profile one-piece toilet

• Elongated siphon action bowl and tank with unique space saving feature

• Fits into the same space as a conventional round front toilet

• Internal trapway area fully glazed

• Color-matched trip lever

• Includes color-matched Rise and Shine™ plastic seat and cover (#5324.019) with easy-to-clean, lift-off hinge system.

• 2 bolt caps

• 100% factory flush tested

Nominal Dimensions: 692 x 464 x 635mm (27-1/4" x 18-1/4" x 25")

Fixture only, supply by others

Compliance Certifications Meets or Exceeds the Following Specifications:

• ASME A112.19.2M (and 19.6M) for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified

❏ Color: ❏ Supply with stop:

SPS 2092

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSIONS SHOWN FOR LOCATION OF SUPPLY ARE SUGGESTED. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

TB-015

Revised 3/00

79mm

(3-1/8)

FINISHED WALL

187mm (7-3/8)

13mm (1/2)

165mm

(6-1/2)

305 mm

(12)

692mm

(27-1/4)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTERS

16mm (5/8)

248 mm

(9-3/4)

473mm

(18-5/8)

362mm

(14-1/4)

SUPPLY AS

REQUIRED

FINISHED

FLOOR

*127mm

464mm

(18-1/4)

C/L

635mm

(25)

(5)

229 mm

(9)

368 mm (14-1/2)

*152 mm

(6)