American Standard 2076 User Manual
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Champion® 2-piece Toilets
Champion® Select 2-piece Toilets
Doral™ Champion® 2-piece Toilets
Doral Classic™ Champion® 2-piece Toilets
Oakmont™ Champion® 2-piece Toilets
Townsend™ Champion® 2-piece Toilets
Model 2002 Champion® Right Height™ Elongated Two Piece Toilet
Model 2018 Champion® Normal Height Elongated Two Piece Toilet
Model 2023 Champion® Normal Height Round Front Two Piece Toilet
Model 2057 Champion® Select Right Height™ Elongated Two Piece Toilet
Model 2087 Champion® Select Normal Height Elongated Two Piece Toilet
Model 2035 Champion® Select Normal Height Round Front Two Piece Toilet
Model 2058 Doral Classic™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2074 Doral Classic™ Champion® Normal Height Elongated Two Piece Toilet
Model 2076 Doral Classic™ Champion® Normal Height Round Front Two Piece Toilet
Model 2367 Doral™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2368 Doral™ Champion® Normal Height Elongated Two Piece Toilet
Model 2369 Doral™ Champion® Normal Height Round Front Two Piece Toilet
Model 2625 Oakmont™ Champion® Normal Height Elongated Two Piece Toilet
Model 2627 Oakmont™ Champion® Normal Height Round Front Two Piece Toilet
Model 2738 Oakmont™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2733 Townsend™ Champion® Right Height™ Elongated Two Piece Toilet
Model 2735 Townsend™ Champion® Right Height™ Round Front Two Piece Toilet
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years.
To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.
SAVE FOR FUTURE USE
!
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
NOTE: BACK-TO-BACK INSTALLATION
Depending upon your plumbing and venting conditions, the flow from
the Champion in a back-to-back installation may create a vacuum on
the system and draw water from the opposing bowl. The National
Standards Plumbing Code prohibits the use of a cross fitting for
drainage as throw over is possible. The code does approve a
directional "Y" style fitting with proper venting to direct the water
downward and away from the other toilet.
Recommended fitting type for back-to-back installations.
RECOMMENDED TOOLS AND MATERIALS
Putty Knife Regular Screwdriver Adjustable Wrench Sealant
Hacksaw Wax Ring/Gasket Flexible Supply Tube 1/2" Deep Well Nut Driver or
Closet Bolts Tape Measure Carpenters Level Deep Well Socket Wrench
1
REMOVE OLD TOILET
a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!
c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE: Mounting surface must be clean and level before new toilet is installed!
Product names listed herein are trademarks of American Standard Inc.
© American Standard Inc. 2006
730529-100 Rev. M
NOTE: DRAWINGS ARE FOR DIMENSIONAL PURPOSES ONLY. THEY ARE NOT EXACT REPRESENTATIONS.
2
ROUGHING-IN DIMENSIONS: 2002, 2057, 2058, 2367, 2738, 2733
Right Height™ Elongated Two Piece Toilet
FINISHED WALL
772mm
A
(30-3/8)
470mm
(18-1/2)
D
356mm
(14)
19mm ± 6mm
(1 ± 1/4)
ROUGHING-IN DIMENSIONS: Normal Height Elongated Two Piece Toilet
Normal Height Round Front Two Piece Toilet
FINISHED WALL
Right Height™ Round Front Two Piece Toilet
19mm ± 6mm
(1 ± 1/4)
721mm
*
(28-3/8)
772mm
(30-3/8)
D
A
470mm
(18-1/2)
419mm
*
(16-1/2)
356mm
(14)
E
ROUND FRONT
*
MODELS
83mm
(3-1/4)
305mm
(12)
SUPPLY
AS
419mm
(16-1/2)
16mm
(5/8)
B
C
FINISHED
FLOOR
REQ'D
254mm
152mm
(10)
(6)
F
E
83mm
(3-1/4)
16mm
(5/8)
305mm
(12)
B
C
387mm
(15-1/4)
FINISHED
FLOOR
SUPPLY
AS
REQ'D
254mm
152mm
(10)
(6)
F
DIMENSIONS
MODEL
AB CD EF
2002 229mm (9) 264mm (10-3/8) 362mm (14-1/4) 483mm (19) 860mm (33-7/8) 254mm (10)
2018 229mm (9) 264mm (10-3/8) 362mm (14-1/4) 483mm (19) 829mm (32-5/8) 254mm (10)
2023 229mm (9) 264mm (10-3/8) 362mm (14-1/4) 483mm (19) 829mm (32-5/8) 254mm (10)
2057 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 489mm (19-1/4) 873mm (34-3/8) 254mm (10)
2087 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 489mm (19-1/4) 841mm (33-1/8) 254mm (10)
2035 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 489mm (19-1/4) 841mm (33-1/8) 254mm (10)
2058 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 479mm (18-7/8) 873mm (34-3/8) 254mm (10)
2074 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 479mm (18-7/8) 851mm (33-1/2) 254mm (10)
2076 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 479mm (18-7/8) 851mm (33-1/2) 254mm (10)
2367 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 492mm (19-3/8) 872mm (34-5/16) 254mm (10)
2368 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 492mm (19-3/8) 844mm (33-1/4) 254mm (10)
2369 216mm (8-1/2) 264mm (10-3/8) 362mm (14-1/4) 492mm (19-3/8) 844mm (33-1/4) 254mm (10)
2625 216mm (8-1/2) 273mm (10-3/4) 381mm (15) 492mm (19-3/8) 844mm (33-1/4) 286mm (11-1/4)
2627 216mm (8-1/2) 273mm (10-3/4) 381mm (15) 492mm (19-3/8) 844mm (33-1/4) 286mm (11-1/4)
2738 216mm (8-1/2) 275mm (10-13/16) 384mm (15-1/8) 492mm (19-3/8) 872mm (34-5/16) 295mm (11-5/8)
2733 216mm (8-1/2) 267mm (10-1/2) 379mm (14-7/8) 479mm (18-7/8) 873mm (34-3/8) 284mm (11-3/16)
2735 216mm (8-1/2) 267mm (10-1/2) 379mm (14-7/8) 479mm (18-7/8) 873mm (34-3/8) 284mm (11-3/16)
3
CLOSET FLANGE
A
CLOSET BOLTS
INSTALL CLOSET BOLTS
Install closet bolts in flange channel, turn 90°, and slide into
place 6" (152 mm) apart and parallel to wall.
- 2 -
4
SEALANT
INSTALL WAX SEAL
Invert toilet on floor (cushion to prevent damage), and install wax
ring evenly around waste flange, with tapered end of ring facing
toilet. Apply a thin bead of sealant around toilet base.
WAX RING
730529-100 Rev. M
Loading...