American Standard 2071.016 User Manual

FIN ISHED WALL

25m m ± 6m m (1 ± 1/4)

191 mm (7- 1/2)

762 mm

(30 )

457 mm

(18 )

102 mm (4)

305 mm

(12 )

152 mm (6)

356 mm

(14 )

C/L OF OU TLET

362 mm

(14 -1/4)

C/L OF SE AT POS T HOLE S 140 mm (5- 1/2) CEN TER

622 mm

(24 -1/2)

502 mm

(19 -3/4)

191 mm (7- 1/2)

FIN ISHED

FLO OR

248 mm

(9- 3/4)

114 mm

(4- 1/2)

146 mm (5- 3/4)

508 mm

(20 )

SUP PLY AS

REQ UIRED

C/L

HERITAGE™ ELONGATED ONE-PIECE TOILET

❑ 2071.016

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Low-prole, one-piece toilet

• Elongated siphon action bowl with smooth sided, concealed trapway

• Rim height at 356mm (14")

• Design-matched solid plastic seat and cover (5357.016) included

• Chrome-plated side mounted trip lever

• 2 concealed bolt covers

• Internal trapway area fully glazed

• 100% factory ush tested

• Part of Heritage Suite of design-matched xtures

Nominal Dimensions: 762 x 508 x 622mm (30" x 20" x 24-1/2")

HERITAGE™

ELONGATED ONE-PIECE TOILET

VITREOUS CHINA

Fixture only, supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specied:

❑ Color: ❏ White ❏ Bone ❏ Linen ❑ Trip Lever: 730283-XXX0A ❑ 002 Chrome (supplied) ❑ 008 Polished Nickel ❑ 020 White ❑ 021 Bone ❑ 068 Blackened Bronze ❑ 099 Polished Brass ❑ 295 Satin Nickel ❏ Supply with Stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may var y within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

K10

Revised 2/08