American Standard 2045.013 User Manual

FONTAINE™ ELONGATED

PRESSURE-ASSISTED

ONE-PIECE TOILET VITREOUS CHINA

FONTAINE ELONGATED PRESSURE-ASSISTED ONE-PIECE TOILET

❏ 2045.013

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Low-profile, one-piece toilet

• Elongated bowl/flushometer tank*

• Top-mounted push button actuator

• Includes color-matched Rise and Shine™

plastic seat and cover (#5324.019) with easy-to-clean, lift-off hinge system

• Pressure-assisted siphon jet flush action

• 2 bolt caps

• Fully-glazed trapway

• 100% factory flush tested

Nominal Dimensions: 31" x 18-1/8" x 24-1/8" (787 x 460 x 613mm)

Fixture only, supply by others

Compliance Certifications Meets or Exceeds the Following Specifications:

• ASME A112.19.2M (and 19.6M) for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions. Minimum Pressure - 30 psi static required.

To Be Specified

❏ Color: ❏ Supply with stop:

Revised 10/04

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

* Flushmate III tank system by Flushmate® Div. of Sloan Valve Co.

Replaces model 2042.017

FINISHED WALL

13mm (1/2)

216mm

(8-1/2)

76mm (3)

127mm

305mm

(5)

(12)

787mm

(31)

C/L OF SEAT POST HOLES 140mm (5-1/2) CENTER

476mm (18-3/4)

13mm

(1/2)

356mm

(14)

C/L OF OUTLET

(14-7/8)

FINISHED FLOOR

378mm

SUPPLY

AS REQ'D

(114mm)

4-1/2

460mm

(18-1/8)

C/L

178mm (7)

248mm (9-3/4)

613mm (24-1/8)