American Standard 2037.100 User Manual
470 mm
(18 -1/2 )
C/L OF S EAT P OST
HOL ES (1 40mm
CEN TERS)
(5- 1/2)
362 mm
(14 -1/4 )
743 mm
(29 -1/4 )
219 mm
(8- 5/8)
152 mm
(6)
324 mm
(12 -3/4 )
FINI SHED W ALL
14mm
(9/1 6)
83 mm
(3- 1/4)
305mm
(12)
235 mm
(9- 1/4)
114m m
(4-1 /2)
606 mm
(23 -7/8 )
508m m
(20)
337m m
(6)
SUPP LY
AS
REQU IRED
FINI SHED
FLOO R
*
C/L OF O UTLET
16m m
(5/ 8)
LEXINGTON™ ONE-PIECE TOILET
❑ 2037.100
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Low-prole, one-piece toilet
• Elongated siphon action bowl and tank with
concealed trapway
• Includes color-matched Rise and Shine™
plastic seat and cover (#5324.019) with
easy-to-clean, lift-off hinge system
• Fully-glazed trapway
• 100% factory ush tested
• Color-matched push button actuator
• Two color-matched bolt hole covers
Nominal Dimensions:
743 x 508 x 606mm
(29-1/4" x 20" x 23-7/8")
LEXINGTON™
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
Fixture only, supply by others
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
To Be Specied:
❑ Color:
❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❑ Supply with Stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED
SEPARATELY.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
*
IMPORTANT: Dimensions of xtures are nominal and may var y within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
K12
Revised 2/08
Loading...