American Standard 2023.214 User Manual

CHAMPION® 4 ROUND FRONT TOILET

❑ 2023.214

• Vitreous china

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold,

and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® 4 Flushing System performance platform

• 4" non-adjustable, piston action Accelerator™

ush valve

• Siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Speed Connect® tank/bowl coupling system

• Chrome-plated trip lever

• Sweeping pier on bowl

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

CHAMPION® 4

ROUND FRONT TOILET

VITREOUS CHINA

❑ 3110.016 Bowl ❑ 4266.014 Tank

Nominal Dimensions: 721 x 464 x 797mm (28-3/8" x 18-1/4" x 31-3/8")

Fixture only, seat and supply by others

Alternate Tank Congurations Available:

❑ 4266.504 Tank complete with Aquaguard Liner ❑ 4266.604 Tank complete with tank cover

locking device

❑ 4266.704 Tank complete with Aquaguard Liner

and tank cover locking device

❑ 4266.804 Tank complete with trip lever

located on right side

❑ 4266.904 Tank complete with tank cover locking

device and trip lever located on right side

❑ 4266.954 Tank complete with Aquaguard Liner,

tank cover locking device, and trip lever on right side

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and Power Supplementary Purchase Specication for Non-Adjustability - July, 2003 revision

SEE REVERSE FOR ADDITIONAL ROUGHING-IN DIMENSIONS

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black ❏ Seat: (please specify color) ❏ Champion® Slow Close Round Front #5330.010 ❏ Rise & Shine Round Front #5322.011 ❏ EverClean® Round Front Seat with Slow Close

Snap-Off Hinges #5320.110

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

K37

Revised 2/08

FIN ISH ED W ALL

51m m ± 6mm (2 ± 1 /4)

387 mm

(15 -1/ 4)

FIN ISH ED FLO OR

305 mm

(12 )

721 mm

(28 -3/ 8)

C/L OF OUT LET

83m m

(3- 1/4 )

235 mm (9- 1/4 )

419 mm

(16 -1/ 2)

C/L OF SEA T POST HOLES 140 mm (5-1 /2 CEN TERS)

362 mm (14 -1/ 4)

264mm

(10-3/8)

16m m

(5/ 8)

797 mm

(31 -3/ 8)

464 mm

(18 -1/ 4)

SUP PLY

REQ 'D

254 mm

(10 )

152 mm

(6)