American Standard 2004.014 User Manual

CHAMPION® 4 ELONGATED ONE-PIECE TOILET

756 mm

(29 -3/ 4)

203 mm

(8)

44mm (1-3/4)

32m m (1- 1/4 )

381 mm

(15 )

343 mm

(13 -1/ 2)

273mm

(10-3/4)

714 mm

(28 -1/ 8)

425 mm

(16 -3/ 4)

451 mm (17 -3/ 4)

FIN ISH ED WA LL

470 mm

(18 -1/ 2)

C/L OF SE AT POS T H OLE S 140 mm (5- 1/2 ) CEN TER S

305 mm

(12 )

13m m

(1/ 2)

273 mm (10 -3/ 4)

114 mm

(4- 1/2 )

SUP PLY

REQ 'D

FIN IS HED FLO OR

178mm

(7)

102mm

(4)

25mm

(1)

C/L OF OU TLE T

❑ 2004.014

• Vitreous china

• EverClean® surface inhibits the growth of stain- and odor-causing bacteria, mold, and mildew on the surface

• Low-consumption (6.0 Lpf/1.6 gpf)

• Features Champion® 4 Flushing System

performance platform

• 4" self-closing, piston action Accelerator™

ush valve

• Elongated siphon action jetted bowl

• 2-3/8" fully-glazed trapway

• Chrome trip lever

• Rim height at 15" (381mm)

• 100% factory ush tested

• 2 bolt caps

• 10 year warranty

Nominal Dimensions: 756 x 451 x 714mm (29-3/4" x 17-3/4" x 28-1/8")

CHAMPION® 4

ELONGATED ONE-PIECE TOILET

VITREOUS CHINA

Fixture only, seat and supply by others

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specied:

❏ Color: ❏ White ❏ Bone ❏ Silver ❏ Linen ❏ Black

❏ Trip Lever 738772-XXX0A: ❏ 002 Chrome (supplied) ❏ 068 Blackened Bronze ❏ 099 Polished Brass ❏ 295 Satin Nickel ❏ Seat: ❏ Champion® Slow Close Elongated #5325.010 ❏ EverClean® Elongated Seat, with Cover and

Slow Close Snap-Off Hinges #5321.110

❏ Supply with Stop (by other):

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET. SUPPLY NOT INCLUDED WITH FIX TURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

Revised 2/08