American Standard 2000.101X, 2000.102P, 2000.101, 2000.100 User Manual

2000.101X Shown

MODEL NUMBER:

2000.101 Lavatory Faucet

Metal Speed Connect® pop-up drain. Escutcheon plate.

2000.100 Lavatory Faucet

Less drain. Less hole and pop-up rod. Escutcheon plate.

2000.101X Lavatory Faucet

Metal Speed Connect pop-up drain. Less escutcheon plate.

AVAILABLE ACCESSORY:

2000.102P Escutcheon Plate Only

PRODUCT FEATURES:

Brass Construction:

Durable. Easy to clean.

Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance.

Adjustable Hot Limit Safety Stop: Limits the amount of

hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Low Lead:

Meets NSF Standard 61/Section 9 & Prop 65 lead

requirements.

Exclusive Speed Connect Metal Drain:

• Fewer parts. Installs in less time.

• No adjustments required - seals the first time, every time.

• Flexible stainless steel cable - installs effortlessly in tight spaces.

Choice of Finishes: Available in Polished Chrome or Satin

Nickel (PVD).

SUGGESTED SPECIFICATION:

Single control lavatory fitting shall feature a cast brass body with all metal handle. Shall also feature washerless ceramic disc valve cartridge. Fitting shall be equipped with a hot limit safety stop. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American Standard Model # 2000.____.____.

GENERAL DESCRIPTION:

Cast brass body and brass escutcheon (on applicable models) with all metal handle. Washerless 47mm ceramic disc valve cartridge. Equipped with a hot limit safety stop. Braided flexible supply hoses with 3/8" compression connectors. 20 inch (500mm) long flexible stainless steel drain cable is pre-assembled to spout. Metal Speed Connect® drain body with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min. maximum flow rate.

29mm

(1-1/8 MAX)

62mm

(2-7/16)

58mm

(2-1/8)

DIA.

117mm

(4-5/8)

SINGLE HOLE INSTALLATION

WALL

MOUNTING

SURFACE

25mm

(1)

MIN.

32mm

(1-1/4)

MOUNTING

HOLE

32mm OD

(1-1/4 OD)

450mm

(17-3/4)

CERAMIX

SINGLE CONTROL LAVATORY FAUCET

C15

CERAMIX

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9

Product Number

Description

Finish Options

002

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

PVD

Satin

Nickel

295

2000.101 Lavatory faucet. Metal Speed Connect

Pop-up drain. Escutcheon plate.

2000.100 Lavatory faucet. Less drain, less pop-up hole and rod. Escutcheon plate.

N/A = NOT AVAILABLE

2000.101X

Lavatory faucet. Metal Speed Connect Pop-up drain. Less escutcheon.

2000.102P

Escutcheon plate only.

N/A

Polished

Chrome

FLOW RATE*

GALLONS PER MINUTE

I N L E T PR ES SU RE ( P SI )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

SINGLE CONTROL LAVATORY FAUCET

C16