American Standard 1749.202, 1749.218C, 1749.118C, 1749.218, 1749.118 User Manual
COLONY™ 5’ X 42” w/INTEGRAL APR ON
WHIRLPOOL AND BATHING POOL
HIGH GLOSS ACRYLIC
COLONY 5’ x 42” WHIRLPOOL AND BATHING
POOL with INTEGRAL APRON
❏ 1749.218 Whirlpool featuring System I,
Left Hand Outlet
❏ 1749.118 Whirlpool featuring System I,
Right Hand Outlet
• Acrylic with fiberglass reinforcement
• Integral apron with tile flange and removable
access panels
• Integral 3-sided tile/water retention flange
• Molded-in back rest
• Dual, molded in arm rests
• 1.0 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Six multi-directional and flow-adjustable
jets
• Side-mounted air switch On/Off
• Two air volume controls
• Factory installed and tested whirlpool system
StayClean™ Whirlpool Massage featuring System I
❏ 1749.218C Whirlpool featuring System I,
Left Hand Outlet
❏ 1749.118C Whirlpool featuring System I,
Right Hand Outlet
• Same as above except with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
❏ 1749.202 Bathing pool only, Left Hand Outlet
❏ 1749.102 Bathing pool only, Right Hand
Outlet
• Removable access panel not available on
bathing pool only
Nominal Dimensions: (60” x 43-1/2” x 20-1/4")
1525 x 1105 x 515mm
© 2004 American Standard Inc.
BV-37
2/04
NOTE: Roughing-in dimensions and product
specifica-tions shown on reverse side of page.
Compliance Certifications Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏ Color:
Required Components (not included):
❏ Bath Drain: 1583.470 *
❏ Bath Filler: *
* See your American Standard Distributor
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
Shown: Bathing Pool less Removable Panels
Shown: Whirlpool with Removable Panels
COLONY™ 5’ X 42” w/INTEGRAL APR ON
WHIRLPOOL AND BATHING POOL
HIGH GLOSS ACRYLIC
© 2004 American Standard Inc.
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION. SUPPORT OF BATH BY SUMP
BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (1749.118).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by
ANSI Standards Z124.1 and A112.19.7.
These measurements are subject to change or cancellation. No
responsibility is assumed for use of superseded or voided pages.
SEE FITTING
D
SPECS FOR
IMENSIONS
43-1/2"
(1105 mm)
FINISHED
WALL
(19 mm)
60"
60"
12"
(305 mm)
8-3/4"
(222 mm)
3/4"
(1524 mm)
(6) JETS
9"
(229 mm)
CUTOUT IN FLOOR FOR DRAIN
WATER RETENTION
FLANGE (3 SIDES)
PUMP
21"
(535 mm)
42"
(1067 mm)
SEE FITTING
SPECS FOR
DIMENSIONS
43-1/2"
(1105 mm)
FINISHED
WALL
(19 mm)
12"
(305 mm)
8-3/4"
(222 mm)
3/4"
(1524 mm)
9"
(229 mm)
CUTOUT IN FLOOR FOR DRAIN
WATER RETENTION
FLANGE (3 SIDES)
21"
(535 mm)
42"
(1067 mm)
OPTIONAL TO
FINISHED FLOOR
65 & 78
(1651 & 1981mm)
TOP OF
DECK
2-3/4"
(70 mm)
C/L OF DRAIN
1-1/4" WATER
C/L OF
OVERFLOW
ROUGH
FLOOR
SUPPORT
MATERIAL
RETENTION
FLANGE
(3 SIDES
& APRON)
2-3/4
(70mm)
19
(485mm)
BATH
C/L OF
SHOWER ARM
FINISHED
WALL
C/L OF
VALVES
4
(102 mm)
2-3/4
(70mm)
C/L OF
SPOUT
TILING
FLANGE
12
(305mm)
OPT.
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.TAILPIECE
60 x 42 x 19 In.
(1525 x 1067 x 483mm)
92 Lbs. (42 Kg.)
714 Lbs. (324 Kg.)
72 Gal. (274 L)
44 X 23 In. (1120 x 585mm)
54 x 26 In. (1370 x 660mm)
13-5/8 In. (346mm)
41 Lbs./Sq.Ft. (193 Kgs./Sq.m)
18-1/2
(470mm)
REF.
DIM
4-5/8
(117mm)
LEVELING
STRINGER
NOT FOR
SUPPORT
UNDERSIDE
OF DECK
C/L OF
SUPPLIES
2-3/4"
(70 mm)
C/L OF DRAIN
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
65 & 78
(1651 & 1981mm)
TOP OF
DECK
C/L OF
OVERFLOW
ROUGH
FLOOR
SUPPORT
MATERIAL
(2) AIR VALVES
1-1/4" WATER
RETENTION
FLANGE
(3 SIDES
& APRON)
2-3/4
(70mm)
19
(485mm)
BATH
12
(305mm)
OPT.
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.TAILPIECE
ON/OFF
SWITCH
4
(102 mm)
C/L OF
SHOWER ARM
FINISHED
WALL
C/L OF
VALVES
C/L OF
SPOUT
TILING
FLANGE
2-3/4
(70mm)
ACCESS TO PUMP/MOTOR
THROUGH REMOVABLE
FRONT ACCESS PANEL
LEVELING
STRINGER
NOT FOR
SUPPORT
UNDERSIDE
OF DECK
18-1/2
(470mm)
REF.
DIM
4-5/8
(117mm)
GENERAL SPECIFICATIONS FOR 1749 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
60 x 42 x 19 In.(1525 x 1067 x 483mm)
41 Lbs./Sq.Ft. (193 Kgs./Sq.m)
112 Lbs. (50 Kg.)
714 Lbs. (324 Kg.)
72 Gal. (274 L)
44 x 23 In. (1120 x 585mm)
54 x 26 In. (1370 x 660mm)
52 Gal. (197 L)
13-5/8 In. (346mm)
C/L OF
SUPPLIES
USUALLY BETWEEN
GENERAL SPECIFICATIONS FOR 1749 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
1.0 HP, 9.9 AMPS, 120V.PUMP
Loading...