COLONY O VAL 6’™
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
COLONY OVAL 6’ WHIRLPOOL & BATHING
POOL
❏ 1742.018 Whirlpool featuring System I:
• Acrylic with fiberglass reinforcement
• Molded-in backrest
• Dual, molded in arm rests
• 1.0 HP single speed, self-draining
pump / motor
• Factory installed power cord with plug
• Six multi-directional and flow-adjustable jets
• Side-mounted air switch On / Off
• Two air volume controls
• Factory installed and tested whirlpool system
❏ 1742.018C Stay Clean™ Whirlpool Massage
Featuring System I:
• Same as above except with the
StayClean™ whirlpool system featuring
Antimicrobial AlphaSan®
❏ 1742.002 Bathing Pool only
Nominal Dimensions: 71” x 41” x 23-7/8"
(1805 x 1040 x 606mm)
© 2004 American Standard Inc.
BV-31A
NOTE: Roughing-in dimensions and product
specifications shown on reverse side of page.
02/04
Compliance Certifications Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified - Required:
❏ Color:
To Be Specified - Optional:
❏ Bath Drain: 1583.470*
❏ Bath Filler: *
* See you American Standard Distributor
For color/finish availability and other faucet choices,
please see the Product Selector and Pricing Guide.
COLONY O VAL 6’™
WHIRLPOOL & BATHING POOL
HIGH GLOSS ACRYLIC
© 2004 American Standard Inc.
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUPPORT OF BATH SUMP BY BEDDING. NO ADDITIONAL SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY
OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
■
SEE FTTG.SPECS
FOR DIMENSION
OF SUPPLIES
C
L
1041 mm
(41)
535mm
(21)
82mm
(3-1/4)
51mm
(2)
605mm
(23-7/8 )
555mm
(21-7/8)
SUPPORT
MATERIAL
BATH
98mm
(3-7/8)
305mm
(12)
(2) AIR VALVES
OF DRAIN
C
L
OUTLET
C/L OF
VALVES
102mm
(4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
ON/OFF
SWITCH
292 mm
(11-1/2)
305mm(12) X 229 mm(9)
CUTOUT IN FLOOR FOR DRAIN
1803 mm
C/L OF
SPOUT
(1-3/8)
(71)
SHOWER ARM
35mm
▲OUTLINE OF
CUTOUT-USE
TEMPLATE
C/L OF
ROUGH
FLOOR
98mm
(3-7/8)
PUMP MAY
EXTEND
TO THE RIM
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
1651-1981mm
(65-78)
OPTIONAL
SEE FTTG.SPECS
FOR DIMENSION
OF SUPPLIES
C
L
1041 mm
(41)
535mm
(21)
82mm
(3-1/4)
51mm
(2)
605mm
(23-7/8 )
555mm
(21-7/8)
BATH
SUPPORT
MATERIAL
98mm
(3-7/8)
305mm
(12)
(2) AIR VALVES
OF DRAIN
C
L
OUTLET
C/L OF
VALVES
102mm
(4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
1803 mm
C/L OF
SPOUT
35mm
(1-3/8)
(71)
292 mm
(11-1/2)
305mm(12) X 229 mm(9)
CUTOUT IN FLOOR FOR DRAIN
▲OUTLINE OF
CUTOUT-USE
TEMPLATE
C/L OF
SHOWER ARM
98mm
(3-7/8)
ROUGH
FLOOR
1651-1981mm
(65-78)
OPTIONAL
GENERAL SPECIFICATIONS FOR 1742 WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
71 x 41 x 23-7/8 In.(1805 x 1040 x 606mm)
119 Lbs. (54 Kg.)
680 Lbs. (308 Kg.)
67 Gal. (254 L)
49 x 26 In. (1245 x 660mm)
62 x 34 In. (1588 x 864mm)
32 Lbs./Sq.Ft. (157 Kgs./Sq.m)
50 Gal. (190 L)
16-7/8 In. (429mm)
1.1 HP, 9.9 AMPS, 120V.PUMP
GENERAL SPECIFICATIONS FOR 1742 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
32 Lbs./Sq.Ft. (157 Kgs./Sq.m)
71 x 41 x 23-7/8 In.
(1805 x 1040 x 606mm)
99 Lbs. (45 Kg.)
680 Lbs. (308 Kg.)
67 Gal. (254 L)
49 X 26 In. (1245 x 660mm)
62 x 34 In. (1588 x 864mm)
16-7/8 In. (429mm)