American Standard 1730.018C, 1730.018, H71, 1730.002 User Manual

COLONY CORNER™ WHIRLPOOL AND BATHING POOL

❏ 1730.018 Whirlpool featuring System I

• Acrylic with berglass reinforcement

• Molded-in seat

• Center drain outlet

• 1.25 HP single speed, self-draining pump/motor

• Factory installed power cord with plug

• Six multi-directional and ow-adjustable jets

• Deck-mounted air switch On/Off

• Two air volume controls

• Factory installed and tested whirlpool system

COLONY CORNER™

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

❏ 1730.018C EverClean

Whirlpool

Featuring System I:

• Same as 1730.018 except with the EverClean System

❏ 1730.002 Bathing Pool only

Nominal Dimensions:

1524 x 1524 x 495mm (60" x 60" x 19-1/2")

Compliance Certications Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

American Standard whirlpools and air baths with EverClean® incorporate a patented silver-ion additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes.

To Be Specied - Required:

❏ Color: ❏ Bath Filler: (specify nish) ❏ Bath Drain: 1583.470 (specify nish)

To Be Specied - Optional:

❏ Corner Apron: 0730.121 (specify color) ❏ Jet Trim Ring Kit: 9860.200-two per kit (specify nish) ❏ Universal Tile Bead Kit: 751755-100

For color/nish availability and other faucet choices, please see the Product Selector and Pricing Guide.

SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS

H71

Revised 2/08

COLONY CORNER™

495mm

(19-1/2)

117mm

(4-5/8)

C/L OF DRAIN

OUTLET

51mm (2)

1546mm

(60-7/8)

ALT. PUMP

1064mm

(41-7/8)

686mm (27)

318mm (12-1/2)

1168mm

)(46

1514mm

(59-5/8)

TOP OF

DECK

445mm (17-1/2)

70mm (2-3/4)

ROUGH

FLOOR

83mm (3-1/4)

BATH SUPPORT

MATERIAL

38mm (1-1/2) O.D. TAILPIECE

PUMP

PROVIDE ACCESS FOR SERVICING PUMP & CONTROLS

(6) JETS

ON/OFF SWITCH

2 AIR VALVES

LEVELING STRINGER NOT FOR SUPPORT

483mm (19)

2134mm

)(84

BATH SUPPORT

MATERIAL

495mm

(19-1/2)

6.3mm (1/4) INTEGRAL TILE FLANGE (2 SIDES)

19mm ( )3/4

C/L OF DRAIN OUTLET

LEVELING STRINGER NOT FOR SUPPORT

457mm

)(18

38mm (1-1/2)

1549mm

)(61

1064mm

( )41-29/32

686mm

)(27

686mm

)(27

1168mm

)(46

1511mm

(59-1/2)

876mm (34-1/2)

876mm

(34-1/2)

TOP OF

DECK

56mm

)(2-7/32

ROUGH

FLOOR

79mm (

)3-1/8

101x101mm

4 x 4” FEET

38mm (1-1/2) O.D. TAILPIECE

60 x 60 x 1 9- 1/ 2 In .( 15 24 x 1 52 4 x 49 5mm)

115 L bs . (5 2 Kg .)

908 L bs . (4 12 K g. )

95 Ga l. ( 36 0 L. ) 65 Ga l. ( 24 6 L. )

30 x 5 0 In . (7 62 x 1 27 0m m)

45-1 /2 x 6 3- 1/ 2 In .( 11 56 x 1 61 3m m)

13 In . (3 30 m m)

36 L bs ./ Sq . Ft . (1 77 K gs /S q. m .)

27.8 54

GENERA L SPEC IFICAT IONS F OR 173 0 WHIR LPOOL

INSTA LL ED S IZ E WEIGH T WEIGH T w/ WA TE R GAL. TO O VE RF LO W WHIRL PO OL M IN . OP ER AT IN G VO L. BATHI NG W EL L AT S UM P BATHI NG W EL L AT R IM WATER D EP TH T O OV ER FL OW FLOOR L OA DI NG (PROJ EC TE D AR EA ) PTS.

CUBE (F T3)

WHIRLP OOL EL ECTRIC AL SPE CIFICA TIONS

1.25 HP , 9. 9 AM PS , 12 0V .SYSTE M I PU MP

60 x 60 x 19 -1/ 2 In.

(1 52 4 x 1524 x 49 5mm )

95 Lbs. (43 Kg.)

888 Lb s. (403 K g.)

95 Gal . (360 L)

30 x 5 0 In. ( 76 2 x 127 0m m)

45-1/2 X 31-1 /2 In. (1 15 6 x 1 61 3m m)

13 In. ( 330mm )

36 Lbs ./ Sq.Ft . (174 Kg s. /Sq.m )

27.8

GENERAL SPE CIFIC ATIONS FOR 1730 BATHING PO OL

INSTAL LE D SIZ E

WEIGHT WEIGHT w /WATE R GAL. T O OVERF LO W BATHIN G WELL AT SUMP BATHIN G WELL AT RIM WATER DE PTH T O OVERFLO W FLOOR LO ADING (PROJE CT ED AR EA ) PTS. CUBE ( FT3)

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGR AL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.

■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

CONCEALED PIPING NOT INCLUDED.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING

SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1. These measurements are subject to change or cancellation. No responsibilit y is assumed for use of superseded or voided pages.

H72

Revised 2/08