American Standard 1662.601 User Manual

SHOWER SYSTEMS

PRODUCT FEATURES:

VALVE: Cast Brass Valve Body: Durable. Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance.

Colony Pressure Balancing Valve Cartridge:

Maintains constant output temperature in response to changes in hot and cold supply pressure.

Back-to-Back Capability: Hot and cold can be reversed

quickly and easily.

Adjustable Hot Limit Safety Stop: Limits the amount of

hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Integral Plaster Guard and Mounting Plate:

Protects

valve during installation and serves as a mounting plate for thin-wall installations.

PERSONAL SHOWER: Lightweight, Ergonomic Design:

For a sure grip even

with wet, soapy hands.

SLIDE BAR: Simple Height Adjustment: Allows

positioning of the personal shower anywhere along the bar.

MODEL NUMBER:

1662.601 Shower System Kit

Includes:

SUGGESTED SPECIFICATION:

Shower system shall feature a wall supply with 1/2" NPT female inlets, 1/2" NPSM male outlet, 59" hose, personal shower and a 25" Standard Slide Bar. Pressure Balance valve shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back installation. Shall also feature hot limit safety stop. Fitting shall be American Standard Model # 1662.601.002.

GENERAL DESCRIPTION:

Complete personal shower system includes: a Colony pressure balance valve, a wall supply with 1/2" NPT female inlet and 1/2" NPSM male outlet; a 59" (1500mm) shower hose; a “Fixed” personal shower; and a 25" Slide Bar. Valve features a cast brass body, washerless ceramic disc valve cartridge with back-to-back capability and hot limit safety stop. Cycles from off to hot through cold. Exclusive Colony pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch direct sweat inlets and outlets. With screwdriver stops. Durable metal handle provides easy, certain control for all users. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Fixed handshower with

2.5 gpm/9.5L/min. flow restrictor. Slide bar features an adjustable shower holder which can be set at any height or position along the bar and angle up to 45˚.

32mm (1-1/4)

13mm

(1/2)

1/2" N PT

1829mm (72) to 1990mm (78)

(OPTIONAL)TO FINISHED FLOOR

RUBBER GASKET FINISHED WALL

1/2" N PSM HOSE CONNEC TION

1371SS.240

1660.505

8888.035

8888.037

1660.225

1660.400

• Colony Pressure Balance Valve w/stops

• Fixed Handshower

• Hose

• Wall Supply

• Standard Slide Bar

• In-line Vacuum Breaker

53mm

(2-1/16)

146mm

(5-3/4)

67mm (2-5/8)

1/2" NPSM

5/8 O.D. FOR

1/2 NOM. COPPER

SWEAT

ALL

CONNECTIONS

51mm

(2)

INLETS 149mm

(5-7/8)

51mm

(2)

SWEAT INLETS

w/STOPS

"SEE

ILLUSTRATION

BELOW"

171mm

(6-3/4)

600mm (23-5/8)

549mm (21-5/8)

86mm

(3-3/8)

65mm (2-1/2)

82mm (3-1/4)

45mm (1-3/4)

127mm

(5)

24mm

(1)

SHOWER SYSTEM KIT

F99

SHOWER SYSTEMS

CODES AND STANDARDS

Install as required to comply with local code requirements.

ASME A112.18.1 ASSE 1016 ANSI A117.1

1662.601

Product Number

Description

Shower System Kit. Contains pressure balace valve, “Fixed” handshower, hose, wall supply and slide bar.

Finish

Polished Chrome

002

FLOW RATE*

GALLONS PER MINUTE

I N L E T PR ES SU RE ( PS I)

*Flow rates shown are for mixed hot and cold.

Shower

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

10080604020

SHOWER SYSTEM KIT

F100