American Standard 1660.808 installation manual
Installation / Operating
Instructions
Lyric
1660.808 Series
3-Function Showerhead
with Wireless Speaker
Thank you for selecting American-Standard...the
benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly
please read these instructions carefully before you begin.
Recommened Tools
M965628
Teflon Tape
FRONT
(-) VOLUME
3-FUNCTION
SHOWERHEAD
1
INSTALL SHOWERHEAD
POWER
SPEAKER
(+) VOLUME
REMOVABLE
SHOWERHEAD RING
Adjustable Wrench Channel Locks
• Remove the existing showerhead with an adjustable wrench.
PROTECTIVE CAP
BACK
1/2” NPT INLET
MICRO USB
CONNECTION
FOR CHARGING
• Apply teflon tape to the threads of the shower arm (not included) if necessary.
• Using an adjustable wrench, install the showerhead to the shower arm (not included).
INITIAL CONFIGURATION
STEP 1: TURN ON THE BLUETOOTH DEVICE
AND THE SHOWERHEAD RING
• Turn on the Bluetooth setting on your device.
• Press and release the power button (middle) until
showerhead ring beeps twice.
STEP #2: BLUETOOTH PAIRING
• The power button (middle) will start to blink (blue)
several times and volume buttons (plus and minus) will
remain constantly on (blue). Go to the Bluetooth settings
on your device and select the “Lyric” device to start the
pairing process.
NOTES:
• The showerhead ring can store a maximum of
4 Bluetooth devices.
POWER BUTTON
ON (BLUE)
• Adjusting the volume on your Bluetooth device and/or
showerhead ring might be necessary.
DELETE A BLUETOOTH DEVICE FROM MEMORY
• To delete a Bluetooth device from memory, press and
hold the power button for approximately 5 seconds until
you here a single beep. This will delete the Bluetooth
device that has been used the least of time. However, if
this device is to be re-paired with the showerhead ring,
another device would need to be deleted from memory.
ADDITIONAL FEATURES
TURN OFF THE SHOWERHEAD RING
• Press and release the power button (middle).
All lights will turn off. The showerhead ring will
automatically turn off in 2 minutes when there
is no device in range.
LOW BATTERY INDICATOR
• The power button (middle) will start to blink red.
ALL THREE ON
WHEN CONNECTED
BLINKS (BLUE)
PRESS AND HOLD
PRESS AND
RELEASE
BLINK RED
M965628
Loading...