American Standard Z124.1, 1599.205, 9261.019, A112.19.7M, 2422V.002 User Manual
EVOLUTION™ 5' x 32"
Comfortable bathing design with form-tted
backrest and molded-in armrests
❏ 2422VC Whirlpool w/EverClean® System
• EverClean® System
• Deep Soak overow drain
• 1.4 HP single speed pump/motor
• Side-mounted air switch On/Off
• Eight Jet system featuring:
- Two ow adjustable Comfort Jets™
Hi-Flo Jets
- Six ow adjustable Comfort Jets™
including two in lumbar area
• Two silent air volume controls
• Undermount installation option
• Quick connect whirlpool heater system
(must order whirlpool heater separately)
❏ 2422V Whirlpool
• Same as 2422VC without EverClean System
❏ 2422V.002 Bathing Pool
Nominal Dimensions:
60" x 32" x 21-1/2"
(1524 x 813 x 546mm)
EVOLUTION™ 5' x 32"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Compliance Certications Meets or Exceeds the Following Specications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
American Standard whirlpools with EverClean®
incorporate a patented silver-ion additive right
into the circulation piping to protect the pipes
from mold, mildew, algae and fungus that could
cause deterioration or staining of the pipes.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Components Required:
❏ Bath Filler*: (specify nish)
❏ Bath Drain: 1599.205.XXX (specify color)
Custom Accessories Available:
❏ Safe-T-Heater Whirlpool Heater: 9075.120
❏ 5 Foot Apron: 9261.019.XXX (specify color)
❏ Tile Bead Kit: 751755-100
* See American Standard Faucet Selector
For color/nish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
NOTE: Whirlpool Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
© 2008 AS America Inc.
H91
Revised 4/06
Model 2422VA
60 x 32 x 21 -1 /2 In .
(1 52 4 x 8 13 x 546 mm )
74 Lbs. (34 Kg.)
690 Lb s. ( 31 3 Kg.)
74 Gal . (2 80 L)
33 Gal . (1 25 L)
41-1/4 x 2 2- 1/4 In. ( 10 48 x 56 5m m)
52-1/4 X 2 6 In. (13 27 x 6 60mm)
18-1/2 I n. ( 470mm)
52 Lbs ./ Sq .F t. (253 K gs ./ Sq.m)
GENERA L SPE CIFICATIONS FOR 2422V WHIRL POOL
INSTAL LE D SI ZE
WEIGHT
WEIGHT w /W AT ER
GAL. T O OV ER FLOW
WHIRLP OO L MI N. OPER AT IN G VOL.
BATHIN G WE LL AT SUM P
BATHIN G WE LL AT RIM
WATER DE PT H TO OVER FL OW
FLOOR LO AD IN G
(PROJE CT ED A REA)
WHIRLP OOL ELECTRI CAL SPECIFI CATIONS
1.4 HP, 9. 7 AM PS , 120V.PUMP
60"
(1524mm)
32"
(813mm)
11"
(279mm)
7-3/4"
(197mm)
13-3/4"
(349mm)
6"
(152mm)
3"
(76mm)
3-1/4"
(83mm)
32"
(813mm)
20"(C)
(502mm)
21-1/2"(H)
(546mm)
C/L OF
OVERFLOW
20-1/8"(A)
(511mm)
CUT OUT IN FLOOR
FOR DRAIN
DIMENSIONS OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN THE RANGE
OF TOLERANCES ESTABLISHED BY ANSI STANDARDS Z124.1 AND A112.19.7.
GENERAL SPECIFICATIONS FOR 2422V BATHING POOL
60 x 32 x 20-1/2 (1524 x 813 x 546mm)
54 Lbs. (27 Kg.)
675 Lbs. (306 Kg.)
74 Gal. (280 L.)
41-1/4 x 22-1/4 In. (1048 x 565mm)
52-1/4 x 26 In. (1327 x 660mm)
18-1/2 (470mm)
57 Lbs./Sq.Ft. (247 Kgs./Sq.m)
INSTAL LED SI ZE
WEIGHT
WEIGHT w/WAT ER
GAL. T O OVER FLOW
BATHIN G WELL AT SU MP
BATHIN G WELL AT RI M
WATER DEPTH TO OVE RFLOW
FLOOR LOADIN G
(PROJE CTED A REA)
shown
EVOLUTION™ 5' x 32"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
© 2008 AS America Inc.
SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
■REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.
H92
Revised 3/06
Loading...