American Standard 1480.100, 1480.101 User Manual

MODEL NUMBER:

1480.101 Seva Single Control Centerset

Metal Speed Connect® Pop-up drain. Escutcheon plate.

1480.100 Seva Single Control Centerset

Less pop-up drain. Less pop-up hole. Escutcheon plate.

PRODUCT FEATURES:

Brass Construction: Durable. Easy to clean. Ideal for

prolonged contact with water.

Ceramic Disc Valve Cartridge: Assures a lifetime of

drip-free performance.

Adjustable Hot Limit Safety Stop: Limits the amount of

hot water allowed to mix with cold. Reduces the risk of accidental scalding.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65 lead

requirements.

Exclusive Speed Connect® Metal Drain:

• Fewer parts. Installs in less time.

• No adjustments required - seals the first time, every time.

• Flexible stainless steel cable - installs effortlessly in tight spaces.

Choice of Finishes: Choice of Polished Chrome or Satin

Nickel (PVD).

SUGGESTED SPECIFICATION:

Single control lavatory fitting shall feature a cast brass body and escutcheon with all metal handle. Shall also feature washerless ceramic disc valve cartridge with integral hot limit safety stop. Shall also feature a metal drain body with stainless

steel cable actuation. Fitting shall be American Standard Model # 1480.___.___.

GENERAL DESCRIPTION:

Cast brass body and brass escutcheon with all metal handle. Washerless 47mm ceramic disc valve cartridge with integral hot limit safety stop. Braided flexible supply hoses with 3/8" compression connectors. 20 inch (500mm) long flexible

stainless steel drain cable is pre-assembled to faucet body. Metal Speed Connect® drain body with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min. maximum flow rate.

1480.101 Shown

127mm

(5)

114mm

(4-1/2)

450mm

(17-3/4)

29mm

(1-1/8) MAX.

50mm

(2)

54mm (2-1/8)

WALL

25mm

(1)

MIN.

32mm OD

(1-1/4 OD)

SEVA

SINGLE CONTROL LAVATORY FAUCET

C21

SEVA

1480.101

Product Number

Description

Seva Single Control Centerset. Metal Speed Connect® Pop-up drain.

1480.100 Seva Single Control Centerset. Less pop-up drain. Less pop-up hole.

Finish Options

Polished

Chrome

002

PVD

Satin

Nickel

295

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 NSF 61/Section 9

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

N/A =

NOT AVAILABLE

N/A

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R ES SU RE ( P SI )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

10080604020

SINGLE CONTROL LAVATORY FAUCET

C22