American Standard 1340M.105 User Manual
GENERAL DESCRIPTION:
Metering piller tap faucet. Vandal resistant solid brass
construction. Easy-push handle. Water conserving pressure
compensating 1.5 GPM aerator. Factory set for a maximum of
0.25 gallon flow per activation. Replaceable cartridge. Adjustable
flow cycle.
MODEL NUMBER:
1340.105 Cast spout, 1.5 GPM pressure compensating
vandal-resistant aerator
1340M.105 Same as above with mechanical mixing valve
OPTIONAL 4" or 8" Deck plates
605P.400 4" brass deck plate with 1/4" fixation studs
and quick spin nuts. (6-1/8" x 2-1/8" x 1/2")
605P.800 8" brass deck plate with 1/4" fixation studs
and quick spin nuts. (10-1/8" x 2-3/8" x 1/2")
130mm
(5-1/8)
78mm
(3-1/8)
51mm
(2)
106mm
(4-3/16)
26mm
(1-1/16)
52mm
(2)
3/8" COMPRESSION
MOUNTING
SURFACE
51mm
(2)
560mm
(22)
PRODUCT FEATURES:
• Pressure Compensating Aerator: Provides a constant
water flow of 1.5 gpm throughout the pressure range.
• Vandal-Resistant Brass Construction and Aerator:
Durable - Excellent in high use applications.
• Automatic Shut-off:
Stops water and energy waste. Ideal for
public restrooms where uncontrolled water usage is costly.
• Meets ADA Standard:
Requires less than 5 lbs. of operating
force to initiate flow per ANSI A117.1.
• Single Supply: For cold or tempered water.
• Adjustable Flow Cycle
• Replaceable Valve Cartridge: Facilitates simple
replacement.
• Optional Mixing Valves: (sold separately)
• Mechanical (Model # 021943-0070A)
• Thermostatic (Model # 605XTMV)
• Flexible Supply Hose: With 3/8" Compression Connection
• Optional 4" or 8" Deck Plate
SUGGESTED SPECIFICATION
Metering faucet shall feature a single handle vandal-resistant brass construction with a replaceable valve cartridge and an
adjustable flow cycle. Shall also feature a water-conserving pressure compensating 1.5 gpm/5.7L/min vandal-resistant
aerator. Factory set to maintain flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button
activator shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.105.002.
89mm
(3-1/2)
METERING FAUCETS
PILLER TAP FAUCET
© 2008 AS A meric a Inc.
L13
METERING FAUCETS
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
FLOW RATE*
VOLUME PER CYCLE (GAL)
P R E S SU R E ( PS I )
0.00
20 40 8060
0.05
0.10
0.15
0.20
0.25
PILLER TAP FAUCET
© 2008 AS A meric a Inc.
L14
Loading...