American Standard 1340M.000, 1340.000, 1340M.000X User Manual
GENERAL DESCRIPTION:
Vandal-resistant brass body and cap. Replaceable valve
cartridge. One-half inch male NPSM shank with vandalresistant mounting and brass escutcheon plate (use is
optional). Operating range from 20 to 125 psi. Adjustable
flow cycle from 7 to 40 seconds (factory preset at a minimum
of 10 seconds). Vandal-resistant spray end with 1.5 gpm flow
control maintains flow below 0.25 gallons per cycle. Push
button activator requires less than 5 lbs. of force to operate.
Available with mixing valve and built-in checks or without
mixing valve for use with cold or tempered water.
PRODUCT FEATURES:
Vandal-Resistant Brass Body, Cap, and Mounting:
Durable - Excellent in high use applications.
Automatic Shut-off: Stops water and energy waste. Ideal
for public restrooms where uncontrolled water usage is costly.
Meets ADA Standard: Requires less than 5 lbs. of
operating force to initiate flow per ANSI A117.1.
Single Handle Design: Eliminates the possibility of
scalding which can occur with two handle designs - when the
cold side turns off before the hot.
Adjustable Flow Cycle: Can be easily adjusted from 7 to
40 seconds.
Replaceable Valve Cartridge: Facilitates simple
replacement.
Mixing: Provides tempered mixed water for faucet. Includes
a field adjustable mixing valve with built-in checks and built-in
cleanable strainer to protect valve from line debris (on
applicable model).
COMMERCIAL
SINGLE CONTROL METERING FAUCET
MODEL NUMBER:
1340M.000 Vandal Resistant Metering Faucet
with mixing valve.
Built-in strainer and checks. Escutcheon plate (use is
optional).
1340M.000X Vandal Resistant Metering Faucet
with mixing valve.
Built-in strainer and checks. Less escutcheon plate.
1340.000 Vandal Resistant Metering Faucet less
mixing valve.
Single supply for cold or tempered water.
Escutcheon plate (use is optional).
48mm
(1-7/8)
111mm
(4-3/8)
44mm
(1-3/4)
MAX
70mm
(2-3/4)
44mm
(1-3/4)
DIA.
1/2-14
NPSM
THREAD
90mm
(3-9/16)
MIXING VALVE
WITH BUILT-IN
CHECKS AND
STRAINER
(ON APPLICABLE
38mm
(1-1/2)
NOTE: Dimensions are shown for product installed
less escutcheon.
Escutcheon is:
30°
MODEL)
160mm (6-5/16) long
64mm (2-1/2) deep
5mm (3/16) height
38mm
(1-1/2)
SUGGESTED SPECIFICATION
Single control metering faucet shall feature a vandal-resistant brass body, cap and mounting with a replaceable valve
cartridge. Shall also feature an adjustable flow cycle from 7 to 40 seconds. Shall also feature a vandal-resistant spray end
which maintains flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator shall
meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.____.____
COMMERCIAL
SINGLE CONTROL METERING FAUCET
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1M
CSA B 125
GALLONS
*Cycle timed at 10 seconds.
FLOW VOLUME PER CYCLE*
0.30
Required maximum flow of 0.25 gal/cycle
0.25
0.20
0.15
0.10
0.05
0.00
INLET PRESSURE (PSI)
Product
Number
Description
1340M.000 Metering Faucet with mixing valve. Built-in strainer and checks. Optional escutcheon.
80604020
Finish
Polished
Chrome
002
1340M.000X Metering Faucet with mixing valve. Built-in strainer and checks. Less escutcheon.
1340.000
Metering Faucet. Optional escutcheon.
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Loading...