American Standard 1340.725 User Manual

METERING FAUCETS

GENERAL DESCRIPTION:

Metering faucet with conventional spout and single control. Vandal-resistant solid brass construction. Easy-push handle. Water conserving, pressure compensating 1.5 GPM vandal-resistant aerator. Factory set for a maximum of 0.25 gallon flow per activation. Replaceable cartridge. Adjustable flow cycle.

MODEL NUMBER:

1340.725 Cast Spout Single Valve, 1.5 GPM pressure

compensating, vandal-resistant aerator

FOR GROUND JOINT

OR 1-1/2" O.D. SLIP

CONNECTION

131mm (5-3/16)

93mm (3-5/8)

102mm

(4)

54mm (2-1/8)

130mm

(5-1/8)

141mm (5-9/16)

51mm

(2)

33mm

(1-3/16)

MOUNTING

SURFACE

38mm (1-1/2)

38mm

(1-1/2)

90mm (3-1/2)

30mm

(1-1/16 D.)

PRODUCT FEATURES:

• Pressure Compensating Aerator: Provides a constant

water flow of 1.5 gpm throughout the pressure range.

• Vandal-Resistant Brass Construction and Aerator:

Durable - Excellent in high use applications.

• Automatic Shut-off: Stops water and energy waste. Ideal for

public restrooms where uncontrolled water usage is costly.

• Meets ADA Standard: Requires less than 5 lbs. of operating

force to initiate flow per ANSI A117.1.

• Single Supply: For cold or tempered water.

• Adjustable Flow Cycle

• Replaceable Valve Cartridge: Facilitates simple replacement.

• Optional Mixing Valves (sold separately)

• Mechanical (Model # 021943-0070A)

• Thermostatic (Model # 605XTMV)

SUGGESTED SPECIFICATION

Metering faucet shall feature a single handle vandal-resistant brass construction with a replaceable valve cartridge and an adjustable flow cycle. Shall also feature a water-conserving pressure compensating 1.5 gpm/5.7L/min vandal-resistant aerator. Factory set to maintain flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.725.002.

46mm (1-3/4)

CONVENTIONAL SPOUT SINGLE VALVE

L19

METERING FAUCETS

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1 ASME A112.18.1 CSA B 125 NSF 61/Section 9

FLOW RATE*

VOLUME PER CYCLE (GAL)

P R E S SU R E ( PS I)

0.00 20 40 8060

0.05

0.10

0.15

0.20

0.25

CONVENTIONAL SPOUT SINGLE VALVE

L20