American Standard 1340.225 User Manual
METERING FAUCETS
GENERAL DESCRIPTION:
Metering centerset conventional spout faucet. Vandalresistant solid brass construction. Easy-push handles.
Water conserving, pressure compensating 1.5 GPM
vandal-resistant aerator. Factory set for a maximum of
0.25 gallon flow per activation. Replaceable valve
cartridge. Adjustable flow cycle.
MODEL NUMBER:
1340.225 Cast centerset, 1.5 GPM pressure
compensating, vandal-resistant aerator
118mm
(4-5/8)
54mm
(2-1/8)
MOUNTING
SURFACE
38mm
(1-1/2)
86mm
(3-3/8)
57mm
(2-1/4)
60mm
(2-3/8)
154mm
(6)
102mm
(4)
46mm
(1-3/4)
27mm
(1-1/16)
FOR GROUND JOINT
OR 1-1/2" O.D. SLIP
CONNECTION
PRODUCT FEATURES:
• Pressure Compensating Aerator:
Provides a constant
water flow of 1.5 gpm throughout the pressure range.
• Vandal-Resistant Brass Construction and Aerator:
Durable - Excellent in high use applications.
• Automatic Shut-off:
Stops water and energy waste. Ideal for
public restrooms where uncontrolled water usage is costly.
• Meets ADA Standard:
Requires less than 5 lbs. of operating
force to initiate flow per ANSI A117.1.
• Adjustable Flow Cycle
• Replaceable Valve Cartridge: Facilitates simple replacement.
• Hot/Cold Button Indicators
SUGGESTED SPECIFICATION
Metering faucet shall feature a vandal-resistant brass construction with a replaceable valve cartridge and an adjustable flow
cycle. Shall also feature a water-conserving pressure compensating 1.5 gpm/5.7L/min vandal-resistant aerator. Factory set to
maintain flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet
ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.225.002
CENTERSET SPOUT
© 2008 AS A meric a Inc.
L15
METERING FAUCETS
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
VOLUME PER CYCLE (GAL)
P R E S SU R E ( PS I )
0.00
20 40 8060
0.05
0.10
0.15
0.20
0.25
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
CENTERSET SPOUT
© 2008 AS A meric a Inc.
L16
Loading...