American Standard 1000El, 1100EL, 120012 User Manual
Two-Piece Toilets
Two-Piece Toilets
C/L OF
OUTL ET
FINI SHED W ALL
FINI SHED
FLOO R
SUPP LY
AS
REQ’ D
15"
(380 mm)
1" ± 1/4"
(25m m ± 6m m)
27-1 /4"
(692 mm)
16-1 /2"
(419 mm)
C/L OF SEAT POST
HOLE S 5-1/ 2"
(140MM) CENT ERS
14"
(356 mm)
3-1/ 4"
(83m m)
8"
(202 mm)
26-7 /8"
(683 mm)
19-7 /16"
(494 mm)
9-5/ 8"
(245 mm)
6"
(152 mm)
10"
(254 mm)
12"
(304 mm)
12"
(304 mm)
6-7/ 16"
(163 mm)
16mm
(5/8 )
*
C/L OF
OUTL ET
FINI SHED W ALL
FINI SHED
FLOO R
SUPP LY
AS
REQ’ D
14-5 /8"
(370 mm)
1" ± 1/4"
(25m m ± 6m m)
29-1 /4"
(743 mm)
18-1 /2"
(470 mm)
C/L OF SEAT POST
HOLE S 5-1/ 2"
(140 MM) CE NTERS
14"
(356 mm)
3-1/ 4"
(83m m)
8"
(202 mm)
12"
(304 mm)
26-7 /8"
(683 mm)
19-7 /16"
(494 mm)
9-7/ 8"
(250 mm)
6"
(152 mm)
10"
(254 mm)
12"
(304 mm)
7"
(177 mm)
16mm
(5/8 )
*
ELONGATED FRONT TOILET
Models ❏ 1000EL.WHT and ❏ 1000EL.BON
❏ Bowl – White 1100EL.WHT
❏ Bowl – Bone 1100EL.BON
❏ Tank – White 120012.WHT
❏ Tank – Bone 120012.BON
Nominal Dimensions:
29-1/4" x 19-7/16" x 26-7/8"
(743 x 494 x 683mm)
ROUND FRONT TOILET
Models ❏ 1000RF.WHT and ❏ 1000RF.BON
❏ Bowl – White 1100RF.WHT
❏ Bowl – Bone 1100RF.BON
❏ Tank – White 120012.WHT
❏ Tank – Bone 120012.BON
Nominal Dimensions:
27-1/4" x 19-7/16" x 26-7/8"
(692 x 494 x 683mm)
• Close-coupled, two-piece toilet
• Fixture only, seat and supply by others
• Vitreous china
• 1.6 gallons (6 liters) of water per flush
• 12" (305mm) rough-in
To Be Specified:
Color: ❏ White ❏ Bone
Supply with stop: _____________
❏
• Available in Elongated and Round Front
• Siphon vortex bowl
• 14" (356mm) rim height
• Fully glazed 2" trapway
• 9" x 8-3/4" water surface area
• Two color-matched bowl caps
• One year limited warranty
NOTES:
THIS COMBINATION IS DE SIGNED TO ROUGH-IN AT A MI NIMUM DI MENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED. SUPPLY NOT I NCLUDED WITH FIXTURE AN D MUST BE ORDERED SEPARATELY.
*
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
Compliance Certifications –
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures –
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 10/08
Loading...