American Standard 0780.001, 0790.004 24, 0790.001, 0790.008, 0780.008 User Manual
...
TOWN SQUARE® CLASSIC CADDIE
• Traditional styled storage unit in a Cognac nish
• Can accommodate Town Square® Collection 24"
or 27" pedestal sink, both available in 4", 8", and
CHO faucet drillings
• Easy installation combined with hidden storage
• Design-matched to Town Square® xtures,
faucets and accessories
Nominal Dimensions with 24" Top:
24" x 20-1/4" x 35-1/2"
(610 x 514 x 902mm)
Nominal Dimensions with 27" Top:
27" x 21-1/4" x 35-1/2"
(686 x 540 x 902mm)
Separate Components:
❏ 0790.004 24" Pedestal top 4" (102mm) centers
❏ 0790.008 24" Pedestal top 8" (203mm) centers
❏ 0790.001 24" Pedestal top Center hole only
❏ 0780.004 27" Pedestal top 4" (102mm) centers
❏ 0780.008 27" Pedestal top 8" (203mm) centers
❏ 0780.001 27" Pedestal top Center hole only
❏ 9370.100 Classic Caddie only
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous Ceramic
• CAN/CSA B45 Series
TOWN SQUARE
CLASSIC CADDIE
FIRE CLAY/WOOD
To Be Specied:
❏ Pedestal Top Color: 020 White, 178 Black,
222 Linen, 021 Bone
❏ Town Square Faucet:
❏ Centerset Lavatory Faucet: 2555.201 (shown)
❏ Widespread Lavatory Faucet: 2555.801
❏ Other Lavatory Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
®
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
Cognac
© 2008 AS America Inc.
I35
Revised 2/08
TOWN SQUARE
9-5/8"
(244mm)
21-1/4"
(540mm)
27"
(686mm)
27"
(686mm)
FINISHED
WALL
1-3/4" DIA.
STD. DRAIN
OUTLET
20-1/4" (514mm)
2-5/8"
(67mm)
4"
(102mm)
3-3/4"
(95mm)
1-1/4" O.D.
WASTE
*20"
(508mm)
*18"
(457mm)
SUPPLIES AS
REQUIRED
6"
(152mm)
1-1/4" O.D.
TAILPIECE
16-1/8"
(410mm)
14-1/8"
(359mm)
FINISHED
FLOOR
35-1/2"
(902mm)
28"
(711mm)
8"
(203mm)
9-1/2"
(241mm)
20-1/4"
(514mm)
24"
(610mm)
FINISHED
WALL
1-3/4" DIA.
STD. DRAIN
OUTLET
18-3/4" (476mm)
2-5/8"
(67mm)
4"
(102mm)
3-3/4"
(95mm)
1-1/4" O.D.
WASTE
*20"
(508mm)
*18"
(457mm)
SUPPLIES AS
REQUIRED
6"
(152mm)
1-1/4" O.D.
TAILPIECE
16-1/8"
(410mm)
14-1/8"
(359mm)
FINISHED
FLOOR
35-1/2"
(902mm)
28"
(711mm)
8"
(203mm)
24"
(610mm)
CLASSIC CADDIE
FIRE CLAY/WOOD
®
TOWN SQUARE® CLASSIC CADDIE with
24" PEDESTAL TOP
TOWN SQUARE® CLASSIC CADDIE with
27" PEDESTAL TOP
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P” TRAP ARE SUGGESTED.
*
■ FOR REINFORCEMENT ONLY. TAKE ACTUAL DIMENSIONS FROM FIX TURE.
- SLAB/PEDESTAL ANCHORS AND MOUNTING FEATURES TO BE FURNISHED BY OTHERS.
- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
© 2008 AS America Inc.
I36
Revised 2/08
Loading...