American Standard 0700.008, 0700.004, 0700.001 User Manual
BARRIER FREE
TOWN SQUARE® COUNTERTOP SINK
4"
(102mm)
9-3/4"
(248mm)
18-3/4"
(476mm)
23-1/8"
(587mm)
FINISHED WALL
OR SPLASHBACK
8"
(203mm)
31"
(787mm)
SUGGESTED
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
*
10-3/4"
(273mm)
*
12-7/8"
(327mm)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
1"
(25mm)
8-1/8"
(206mm)
OPTIONAL
SUPPLIES
AS REQ'D
1-3/4" DIA.
STD. DRAIN
OUTLET
2-7/8"
(73mm)
• American classic design
• Clean, straight lines with classic ogee curves
• Tapered interior bowl with at bottom design
provides dramatic look
• Made from ne reclay
• Self-rimming with cutout template supplied
• Front overow
❏ 0700.004 Faucet holes on 4" (203mm) centers
(illustrated)
❏ 0700.008 Faucet holes on 8" (102mm) centers
❏ 0700.001 Center hole only
Nominal Dimensions:
23-1/8" x 18-3/4"
(587 x 476mm)
Bowl sizes:
18-1/2" (470mm) wide
10-1/2" (267mm) front to back
6-1/4" (159mm) deep
TOWN SQUARE
COUNTERTOP SINK
FIRECLAY
®
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 series
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Town Square Faucet:
❏ Centerset Sink Faucet: 2555.201 (shown)
❏ Widespread Sink Faucet: 2555.801
❏ Other Sink Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP
*
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J27
Revised 2/08
Loading...