American Standard 0680.000 User Manual
PETAL™ ABOVE-COUNTER SINK
• Distinctive oral design in shape of petal
• Made from vitreous china
• Sink rim rises above counter or cabinet top
• Sink without over ow
❏ 0680.000
Nominal Dimensions:
400mm (15-3/4") Round
Bowl sizes:
318mm (12-1/2") round
95mm (3-3/4") deep
PETAL™
ABOVE-COUNTER SINK
VITREOUS CHINA
Compliance Certi cations Meets or Exceeds the Following Speci cations:
• ASME A112.19.2M for Vitreous China Fixtures
To Be Speci ed:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
(1-1/4) DIA. HOLES
FINISHED WALL
OR SPLASHBACK
COUNTERTOP
(BY OTHERS)
159mm
*
(6-1/4)
216mm
*
(8-1/2)
(3) 32mm
SEALING
COMPOUND
SUPPLIES
AS REQ'D
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
203mm
(8)
C/L
400mm REF.
(15-3/4)
203mm
(8)
FINISHED
FLOOR
51mm
(2) MIN.
COUNTERTOP
CUTOUT 267mm
(10-1/2) DIA.
76mm
(3)
76mm
(3)
178mm
(7)
SUGGESTED
787mm
(31)
51mm
(2) MIN.
216mm
(8-1/2)
432mm
(17)
© 2006 American Standard Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IN- FIELD ADJUSTMENT OF POP-UP ROD EXTENSION REQUIRED.
PROVIDE A 2-1/2" OFF-SET BEND FOR PROPER OPERATION.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J17
Revised 5/05
Loading...