American Standard 0660.000, 0660.312, B45 User Manual
LOFT™ ABOVE-COUNTER SINK
FIN ISHED WALL
OR SPLASH BACK
COU NTERTO P
CUT OUT 33 0mm
(13 ) DIA.
OPTIONAL
*
165mm
(6-1/2)
95mm
(3-3/4)
76mm
(3)
SEALING
COMPOUND
*
222mm
(8-3/4)
178mm
(7)
203 mm
(8)
1-1 /4 O.D .
TAI LPIECE
1-1 /4 O.D .
WAS TE
SUP PLIES
AS REQ'D
COUNTERTOP
(BY OTHERS)
35m m
(1- 3/8) D IA. HO LE
222mm
(8-3/4)
83mm
(3-1/4)
C/L
ø376mm
(14-3/4)
FINISHED
FLOOR
787mm
(31)
123mm
(4-7/8)
286mm
(11-1/4)
ø451mm
(17-3/4)
❏ 0660.000
• Stylish above-counter sink
• Made from vitreous china
• Integral faucet deck for single-control
faucet mounting
• Generous bowl depth
• Center drain outlet without overow
• Can be mounted in Brook console table
• Supplied with cutout template and sealant
❏ 0660.312 Same as above with front overow
Nominal Dimensions:
451mm (17-3/4") Round
Bowl sizes:
376mm (14-3/4") round
127mm (5") deep
LOFT™
ABOVE-COUNTER SINK
VITREOUS CHINA
Compliance Certications Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
• CAN/CSA B45 series
• A1995 National Building Code, section 3.7 and
CAN/CSA - B651-M90 and OBC 3.7
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
To Be Specied (Optional):
❏ Brook Console Table Frame 9373.100
❏ Frame Finish
❏ Brook wood top 9474.670 pre-cut for Loft and
Morning above counter sink
❏ Wood Top Finish
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J18
Revised 2/08
Loading...