BOULEVARD™ UNDERCOUNTER SINK
51m m
(2) M IN.
71m m
(2- 13 /16 )
FIN IS HED W ALL
OR SP LAS HB ACK
203 mm
(8)
EDGE OF
COUNTER
TOP
CUTOUT
A
B
40m m
(1- 9/ 16)
514 mm
(20 -1 /4)
406 mm
(16 )
DET AI L O F MOU NTI NG CL IP
(KI T No. 47 194 .00 70A)
LAVA
BRASS
INSERT
19mm
(3/4) MIN.
REFER TO INSTRUCTIONS
PROVIDED WITH KIT FOR
ADDITIONAL INFORMATION
CLIP
MACH.
SCREW
1-1 /4 O. D.
TAI LP IEC E
1-1 /4 O. D.
WAS TE
203 mm
(8)
330 mm
(13 )
273 mm
(10 -3 /4)
11m m
(7/ 16 )
203 mm
(8)
SUPPLIES
AS REQ'D.
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
864 mm
(34 )
*
*
FINISHED FLOOR
27m m
(1- 1/ 16)
FITTING
CENTERSE T
SPREAD
A
27mm(1-1 /16)
32mm(1-1 /4)
B
102mm(4)
203mm(8)
432 mm
(17 )
330 mm
(13 )
• Rectangular under mount sink with unique
tapered interior bowl
• Made from vitreous china
• Unglazed rim
• Front overow
• Supplied with mounting kit (047194-0070A)
and template
❏ 0610.000 Unglazed Rim
514 x 406mm
(20-1/4" x 16")
❏ 0610.300 Glazed underside
Bowl Size:
432mm (17") wide
330mm (13") front to back
152mm (6") deep
BOULEVARD™
UNDERCOUNTER SINK
VITREOUS CHINA
Compliance Certications Meets or Exceeds the
Following Specications:
• ASME A112.19.2M for
Vitreous China Fixtures
• CAN/CSA B45 series
To Be Specied:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
NOTES:
WE RECOMMEND USING BASIN AS A TEMPLATE TO DETERMINE
PROPER CONTOUR. CUT COUNTERTOP 38MM (1-1/2") INSIDE BASIN
CONTOUR.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE
*
SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to c hange or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J47
Revised 2/08