American Standard 0575.000 User Manual
COVENTRY™ COUNTERTOP SINK
• Delicate molded-in swirl pattern
• Made from vitreous china
• Self-rimming with cutout template supplied
• Center drain outlet
• Front over ow
❏ 0575.000 Oval sink without faucet deck
Nominal Dimensions:
445mm x 356mm
(17-1/2" x 14")
Bowl sizes:
394mm (15-1/2") wide
311mm (12-1/4") front to back
133mm (5-1/4") deep
Compliance Certi cations Meets or Exceeds the Following Speci cations:
• ASME A112.19.2M for Vitreous China Fixtures
FINISHED
WALL
OR
SPLASH BACK
COVENTRY™
COUNTERTOP SINK
VITREOUS CHINA
51mm
A
B
38mm
(1-1/2)
MIN.
(2)
MIN.
178mm
(7)
To Be Speci ed:
❏ Color:
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
© 2006 American Standard Inc.
C/L
445mm
COUNTERTOP
(BY OTHERS)
305mm
*
(12)
NOTES:
*
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
SEALING
COMPOUND
254mm
*
(10)
SUPPLIES
AS REQ'D.
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
J29
(17-1/2)
203mm
(8)
FITTING
CENTER-SET
SPREAD
16mm
(5/8)
165mm
(6-1/2)
178mm
(7)
27mm(1-1/16)
32mm(1-1/4)
787mm
(31)
SUGGESTED
A
Revised 5/06
356mm
(14)
FINISHED
FLOOR
B
102mm(4)
203mm(8)
Loading...