American Standard 0283.008, CSA B45 User Manual

Standard Collection

22-5/8"

(575mm)

17-15/16" (456mm)

8-1/2"

(216mm)

20"

(508mm)

28-1/2"

(724mm)

24"

(610mm)

22"

(559mm)

36"

(914mm)

10-1/4"

(260mm)

3-7/8"

(98mm)

3/4"

(19mm)

7-1/2"

(191mm)

FINI SHED

FLOO R

FINI SHED WALL

SUPP LIES AS

REQU IRED

1-3/ 4" DI A.

STD. DRAI N

OUTL ET

1-1/ 4" O.D .

WAST E

13"

(330 mm)

26-3 /4"

(680 mm)

(203 mm)

FINISHED WALL

WASHSTAND

FIRE CLAY/WOOD

Standard Collection Standard Collection

WASHSTAND with

Oval Pedestal Top

• Period reproduction of classic dry sink washstand

• Turned leg detailing with lower drawer storage includes chrome hardware (installed) extra satin hardware included

• Washstand available in White or Warm Walnut nishes

• Console/pedestal top with faucet holes on 8" (203mm) centers

• Recommended design-matched 8" spread faucet #2881 available in chrome or satin nish

• Right Height™ for greater comfort during use

• Design matched to Standard Collection® toilet

Separate Components:

❏ 0283.008 Washstand/Pedestal top

8" (203mm) centers

❏ 9441.000.020 Washstand Only (White) ❏ 9441.000.329 Washstand Only (Warm Walnut)

Nominal Dimensions with sink:

26-3/4" x 20" x 36" (679 x 508 x 914mm)

Compliance Certications Meets or Exceeds the Following Specications:

• ASME A112.19.9M for Non-Vitreous Ceramic Fixtures

• CAN/CSA B45 Series

To Be Specied:

❏ Color: ❏ Pedestal Top: 020 White or 222 Linen ❏ Washstand: 020 White or 329 Warm Walnut

❏ Recommended Faucet: 8" spread No. 2881 ❏ Faucet Finish: Chrome or Satin ❏ Supplies: ❏ 1-1/4" Trap: 752683-495 ❏ P-Trap Finish:

Warm Walnut White

NOTES:

DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P”

TRAP ARE SUGGESTED.

- FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.

I27

Revised 2/08