American Standard 0066.000, 0282.800 User Manual

RETROSPECT COLLECTION® PEDESTAL SINK
FINISHED WALL
PEDESTAL
SIDE SECTION
*
*
1-1 /4 O.D . WAS TE
SUP PLIES AS REQ'D
FINISHED FLOOR
9"
(229mm)
19-3/4"
(502mm)
27"
(686mm)
8"
(203mm)
13-3/4"
(349mm)
3-3/8"
(86mm)
PED TOP OUTLINE
1-3/4" DIA.
STD. DRAIN
OUTLET
3/8" (10mm) DIA.
BASE ANCHOR
SCREW HOLE
CENTER
3/8" (10mm) DIA.
SINK ANCHOR
SCREW HOLES
ON 13-3/4" (349mm)
CENTRES
36"
(914mm)
28-1/4"
(718mm)
7-1/4"
(184mm)
8-1/8"
TO BOTTOM
OF DRAIN OUTLET
(206mm)
9-7/8"
(251mm)
24"
(610mm)
22"
(559mm)
1-1/4" O.D. TAILPIECE
8"
(203mm)
3 Holes 1-3/8" (35mm) Dia.
15"
(381mm)
• Authentically styled rectangle pedestal
• Made from ne reclay
• Generous deck area for toiletries
• Hidden front overow
• Supplied with mounting kit
• Right Height™ for greater comfort
Part of design matched Retrospect Collection
0282.800 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
27" x 19-3/4" x 36" (686 x 502 x 914mm)
Separate Components:
0282.008 Pedestal top 8" (203mm) centers ❏ 0066.000 Pedestal only
RETROSPECT COLLECTION
®
PEDESTAL SINK
FIRE CLAY
®
Bowl sizes:
15-1/2" (394mm) wide 12" (305mm) front to back 6-1/8" (156mm) deep
Compliance Certications ­Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous Ceramic Fixtures
• CAN/CSA B45 Series
To Be Specied:
Color: White Recommended Faucet: 2373.701 Faucet Finish: Supplies: 1-1/4" Trap:
© 2008 AS America Inc.
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TR AP ARE
*
SUGGESTED.
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.9. These measurements are subject to c hange or cancellation. No responsibility is assumed for use of superseded or voided pages.
J8
Revised 2/08
Loading...