Americans AEDI1014 Installation & Assembly

Page 1
1
INFLATABLE MOVIE SCREEN
USER’S MANUAL
INFLATBLE MOIVE SREEN
INTRUCATION OF ACCESSORIES.
CAUTION
INFLATABLE MOVIE SCREEN
Package Include:
1 x Inflatable frame 1 x Screen 1 x Repair patch 1 x Blower 8 x Anchors 1 x Ropes 1 x Carry bag 1 x User manual 1 x Repair Sewing Kit
Page 2
2
CAUTIONS:
Please check the accessories attachments
when open the package. Please check the
product broken or not.
Please do not close the frame or movie screen to any sharp stuffs.
Please do not put the frame or screen in dirty or wet place.
Please put the frame in a spacious room or yard when use it. Please keep the blower away from the water in
case of dangerous.
Please not allowed use in BAD WEATHER: Thunderstorm, rainy, windy, snowy weather.
Don't use paint booth outdoors. Booth is not a rainproof product.
Don't use sharp things, such as knives to scratch
How to install
Please read the user’s manual
carefully and keep it for future
reference. If you have any questions
or need any assistance, please feel
free to contact us via Amazon.
STEP 1:Open the package, taking the
screen and accessories out. Please
lay out the frame in a clear, flat area.
Cause the frame is big, spacious
room or yard is the better place for
installation.
Caution, please. Do not put the
frame with any sharp stuffs or stuffs
with blade.
STEP 2: Find the air move duct, and
place it away from the anything that
may obstruct its fan. Take the blower
out and connect with the frame like
picture
shows.
STEP 3: Connect the duct with
the blower by attached strings.
STEP 4 : Make sure the duct
connect with the blower tightly
in case of air leaking or some
other issue happen.
STEP 5: Plug cord into outlet
device to inflate the frame.
This process may take few
minutes. Make sure the air
intake is clear of fabric or other
obstruction and zipper is fully
closed.
STEP 6: Stand the item
upright,ensuring that fans are
always from obstructions.
STEP 7: For out door use, tie
the ropes through each anchor
points(at least 4 points) and
lock with stakes.
How to deflate?
STEP 1: Remove the plug,
disconnect the air mover and
open the zipper to release the
air.
STEP 2: Flatten the frame with the
white movie screen for avoiding
dirty the screen or frame.
STEP 3: Fold in 3 times or more
according to the need. Then put
frame and white screen into the
bag.
Loading...