American Granby N401-005, N401-007, N401-010, N401-012, N401-015 User Manual

FALL 2016

12.3

www.americangranby.com

In the United States: Phone [phone] Fax [phone]

In Canada: Phone [phone] Fax [phone]

Insert Fittings - Nylon

Nylon Insert Fitting Features:

• White nylon insert fittings

• Meets ASTM-2609

• NSF for potable water

N401 Series

Inner/Master

Part Number Description Ctn Qty List Price

N401-005 NYLON INS X INS TEE 1/2" 10/180 $ 2.23
N401-007 NYLON INS X INS TEE 3/4" 10/100 2.64
N401-010 NYLON INS X INS TEE 1" 10/60 4.23
N401-012 NYLON INS X INS TEE 11/4" 5/40 7.22
N401-015 NYLON INS X INS TEE 11/2" 5/30 10.21
N401-020 NYLON INS X INS TEE 2" 5/15 13.80

N406-005 NYLON INS X INS 90 ELBOW 1/2" 10/300 1.91
N406-007 NYLON INS X INS 90 ELBOW 3/4" 10/180 2.18
N406-010 NYLON INS X INS 90 ELBOW 1" 10/100 2.64
N406-012 NYLON INS X INS 90 ELBOW 11/4" 5/60 4.47
N406-015 NYLON INS X INS 90 ELBOW 11/2" 5/40 6.79
N406-020 NYLON INS X INS 90 ELBOW 2" 5/25 9.08

N413-005 NYLON INS X MIPT 90 ELL 1/2" 10/300 3.33
N413-007 NYLON INS X MIPT 90 ELL 3/4" 10/200 4.64
N413-010 NYLON INS X MIPT 90 ELL 1" 10/100 6.53
N413-012 NYLON INS X MIPT 90 ELL 1 1/4” 5/60 8.59
N413-015 NYLON INS X MIPT 90 ELL 11/2" 5/50 12.76

N429-005 NYLON INS X INS COUPLING 1/2" 10/400 1.14
N429-007 NYLON INS X INS COUPLING 3/4" 10/250 1.34
N429-010 NYLON INS X INS COUPLING 1" 10/160 1.79
N429-012 NYLON INS X INS COUPLING 11/4" 10/80 3.22
N429-015 NYLON INS X INS COUPLING 11/2' 5/60 4.35
N429-020 NYLON INS X INS COUPLING 2" 5/40 5.51

N436-005 NYLON INS X MIPT M/A 1/2" 10/400 1.14
N436-007 NYLON INS X MIPT M/A 3/4" 10/250 1.40
N436-010 NYLON INS X MIPT M/A 1" 10/160 1.79
N436-012 NYLON INS X MIPT M/A 11/4" 10/80 2.87
N436-015 NYLON INS X MIPT M/A 11/2" 5/60 4.12
N436-020 NYLON INS X MIPT M/A 2" 5/40 6.47

N406 Series

N413 Series

N429 Series

N436 Series

MAXIMUM DIAMETERS
SIZE C E F
1/2” .605 .445 .665
3/4” .800 .630 .865
1” 1.005 .805 1.095
1 1/4” 1.325 1.105 1.425
1 1/2” 1.565 1.345 1.665
2” 2.020 1.800 2.125

• DO NOT USE NYLON INSERT FITTINGS FOR
COMPRESSED AIR OR GASES.

• DO NOT TEST PIPING SYSTEMS WITH NYLON INSERT
FITTING WITH COMPRESSED AIR OR GASES.

• DO NOT USE FITTINGS WITH LIQUIDS NOT
RECOMMENDED BY MANUFACTURER.

• MODIFICATIONS OF FITTINGS VOIDS THE
WARRANTY.

Recommended Installation Procedures:

• Sizes 1/2, 3/4 and 1” - one clamp directly over barbs.

• Sizes 1 1/4” and greater - one clamp directly over barbs
PLUS one clamp behind barbs.

Insert Diameter Dimensions