American Fibertek UTPR-1-PoE+, UTPT-1-PoE+ Specsheet

UTP-1-PoE+

SERIES

FEATURES:

 Transmits up to distances of 1968ft

(600m)

 Supports mega-pixel technology
 Supports PoE 802.3af & 802.3at
 Supports any network device including

IP cameras

 Supports 10/100 over UTP cables
 Easy installation
 LED indicators for link status and power

SPECIFICATIONS:
Ethernet:

Speed ...........................10/100 Base-TX

PoE........................ 802.3af (15.4 Watts)

PoE........................... 802.3at (30 Watts)

Connector...................................... RJ45

Cable Type ...................... Cat5 or above

Max Distance (Cat5) ................ (100 m)

UTP Interface:

Power Line Communication Protocol

Connector........................................RJ45

Distance(Cat5e)................. 1968ft/(600m)

Downstream Data Rate ............. 90 Mbps

Upstream Data Rate ...................90 Mbps

Power:

Voltage................................48 to 57 Vdc

Power (PoU not used) .................... 8 W

Power (PoU used) ......................... 60 W

Environmental:

Operating Temp..............-10 °C to 60 °C

Storage Temp.................-40 °C to 85 °C

Humidity.............................. 5 % to 95 %

MTBF...................................>100,000 hr

Size:

Module............................4.5” x 3.0” x 1.2”

114 x 72 x 31 mm

ORDERING INFORMATION:

UTPT-1-PoE+ Transmitter
UTPR-1-PoE+ Receiver
PS-4875 Power Supply, DIN, 52V, 75W

10/100Base-TX (PoE+) Ethernet over UTP Extenders
with PoU(UTP)

The American Fibertek Series UTP-1 solution allows for the utilization of
UTP cable infrastructure to transmit bi-directional data from IP cameras
and other network devices. The AFI Series UTPRp-1 receiver power
supply provides Power Over the UTP (PoU) to power the UTPp-1
transmitter which also provides PoE to the IP camera. The PoE power
supply is ordered separately.

The AFI Series UTP-1 link is a system containing a transmitter and a
receiver that requires very little installation and no set up or
configuration. The system can quickly turn any ordinary UTP cable cable
into an IP network communication path.

The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.

The AFI Series UTP-1 system is designed to be completely transparent
to the network. Simply connect your network devices to the networking
ports on the transmitter and receiver and, using UTP cable infrastructure,
the system begins communicating.

IP

Camera

UTPR-1-

PoE

UTPT-1-

PoE

Network

Switch

COAX
up to 1968ft (600m)

Power
Supply

48Vdc

PoU

PoE