American Fibertek UTPR-1, UTPT-1 Specsheet
UTP-1
SERIES
10/100Base-TX Ethernet over UTP Extenders
FEATURES:
Transmits up to distances of 1968ft (600m)
Supports mega-pixel technology
Supports any network device including IP
cameras
Supports 10/100 over UTP cables
Easy installation
LED indicators for link status and power
SPECIFICATIONS:
Ethernet:
Speed…………………...........10/100 Base-TX
Connector .............................................. RJ45
Cable Type……………………..Cat5 or above
Max Distance (Cat5) ......................... (100 m)
UTP Interface:
Power Line Communication Protocol
Connector………………….……..............RJ45
Distance(Cat5e)…………………1968ft/(600m)
Downstream Data Rate……… 90 Mbps(max)
Upstream Data Rate…………. 90 Mbps(max)
Power:
Voltage.................................................12 Vdc
Power...................................................... 8 W
Connector ......................2 Pin Terminal Block
Environmental:
Operating Temp......................-10 °C to 60 °C
Storage Temp .........................-40 °C to 85 °C
Humidity...................................... 5 % to 95 %
MTBF...........................................>100,000 hr
Size:
Module…………………….….4.5” x 3.0” x 1.2”
114 x 72 x 31 mm
ORDERING INFORMATION:
UTPT-1 EoC Transmitter
UTPR-1 EoC Receiver
5/2015 JPK
The American Fibertek Series UTP-1 solution allows for the utilization of
UTP cable infrastructure to transmit bi-directional data from IP cameras
and other network devices up to 1968 feet.
The AFI Series UTP-1 link is a system containing a transmitter and a
receiver that requires very little installation and no set up or
configuration. The system can quickly turn any ordinary UTP cable cab le
into an IP network communication path.
The units packaging are constructed of black anodized aluminum with
corrosion resistant finish. LED indicators show the status and activity of
network communications.
The AFI Series UTP-1 system is designed to be completely transparent
to the network. Simply connect your network devices to the networking
ports on the transmitter and receiver and, using UTP cable infrastructure,
the system begins communicating.
Network
Switch
UTPR-1
1968ft (600m)
UTPT-1
UTP
up to
IP
Camera
Loading...