SUB RACK FRAME:
FEATURES:
19” EIA Sub Rack Frame
Rear Power Bus to all plug-in cards
Blank panels for 1, 2, and 4 slots
100W DC Regulated Power Supplies
11 Card Slots Available
DIMENSIONS:
W x H x D............... 19” x 5 ¼” x 7 ⅝”
Weight (with PSR-2) ...7 ½ lbs, 10kg
TEMPERATURE (OPERATING):
0°C to +50°C non-condensing
POWER SUPPLIES:
FEATURES:
Universal Power 100 to 240VAC
Detachable AC line cord
Power Switch
Cooling Fan
100 Watt Switching Power Supply
BLANK PANELS:
FEATURES:
Available for 1, 2 or 4 slots
Matching Black Paint
Aluminum Construction
¼ Turn Fasteners
BPS-1 .................................... 1 Slot
W x H x D..................... 1” x 5” x 0.1”
Weight .................................... 1.1 oz
BPS-2 .................................... 2 Slot
W x H x D..................... 2” x 5” x 0.1”
Weight .................................... 2.3 oz
BPS-4 .................................... 4 Slot
W x H x D..................... 4” x 5” x 0.1”
Weight .................................... 4.3 oz
Fiber Equipment Rack
with Redundant Power Supplies
The American Fibertek SR-20H/2 Series Fiber Equipment Sub
rack is a system that can be configured with any combination of
American Fibertek products including transmitters, receivers or
transceivers.
The 2 PSR-2H 100 Watt power supplies feature a universal
power input of 100 to 240 VAC with no switch selection
required, high efficiency and current limiting. Redundancy is
offer by load sharing the two supplies.
All AFI part numbers beginning with the letter “R” are
compatible with the SR-20 frame. The frame, power supplies
and plug in cards are all UL Listed: DRQH E194293.
Ordering Information:
SR-20H/2 – SR-20 Rack Frame with 2 PSR-2 included.